Ethernet Interface Reset

Article View: comp.dcom.sys.cisco

Article #377

Back to comp.dcom.sys.cisco Previous Next

#377

From: Ivor D'Souza
Date: Thu, 03 Sep 1992 13:16

14 lines
1216 bytes

I have an AGS+ with 4 ethernet interfaces and high-speed serial interfaces
running 9.0(1).  Two of my newly-activated ethernet interfaces change their
states from "line protocol up" to "line protocol down" without any manual
intervention.  I put a sniffer on the line and notice that the Cisco
keeps sending out loopback packets of Ethertype 9000 to these two ethernet
interfaces.  When I do a "show int eth 3" I notice a high number of 
interface resets.  

Thanks in advance for any suggestions.

 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
    Ivor L. D'Souza                                      INTERNET:        
    System Administrator                            ivor@occs.nlm.nih.gov 
    National Library of Medicine                    Tel: (301) 402-1742

Technical Details

Message-ID: <1992Sep3.131640.10474@nlm.nih.gov>

Path: arc1-ca.pugleaf.net!sparky!uunet!haven.umd.edu!mimsy!lhc!occs!ivor

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!haven.umd.edu!mimsy!lhc!occs!ivor
From: ivor@occs (Ivor D'Souza)
Newsgroups: comp.dcom.sys.cisco
Subject: Ethernet Interface Reset
Message-ID: <1992Sep3.131640.10474@nlm.nih.gov>
Date: 3 Sep 92 13:16:40 GMT
Sender: usenet@nlm.nih.gov (usenet news poster)
Reply-To: ivor@occs.nlm.nih.gov
Organization: National Library of Medicine, MD
Lines: 14
X-Newsreader: Tin 1.1 PL4