Article View: comp.dcom.sys.cisco
Article #533Re: 1Mb memory constraints in router?
From: Juha Heinanen
Date: Mon, 13 Aug 1990 18:07
Date: Mon, 13 Aug 1990 18:07
11 lines
1028 bytes
1028 bytes
I have run out of memory when having many interfaces (about 10) and several routing protocols active on one router. It printed something to the console to note the fact. In 8.2 you should be able to execute the code directly from the PROM which frees alot of memory at the expense of some loss in performance. I would, however, recommend that you buy csc-3 processor (which has 4MB of memory) for all new routers. -- -- Juha Heinanen, Tampere Univ. of Technology, Finland jh@tut.fi (Internet), tut!jh (UUCP), jh@tut (Bitnet)
Technical Details
Message-ID:
<JH.90Aug13200731@etana.tut.fi>Path:
arc1-ca.pugleaf.net!utzoo!attcan!uunet!samsung!zaphod.mps.ohio-state.edu!rpi!uupsi!sunic!tut!tut!jhReferences:
<24656@boulder.Colorado.EDU>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!samsung!zaphod.mps.ohio-state.edu!rpi!uupsi!sunic!tut!tut!jh From: jh@tut.fi (Juha Heinanen) Newsgroups: comp.dcom.sys.cisco Subject: Re: 1Mb memory constraints in router? Message-ID: <JH.90Aug13200731@etana.tut.fi> Date: 13 Aug 90 18:07:31 GMT References: <24656@boulder.Colorado.EDU> Sender: news@funet.fi (#News ) Organization: Tampere Univ. of Technology, Finland. Lines: 10 In-Reply-To: HANK@BARILVM.BITNET's message of 13 Aug 90 07:47:00 GMT