Cisco configuration to boot 3Com terminal servers across subnets

Article View: comp.dcom.sys.cisco

Article #541

Back to comp.dcom.sys.cisco Previous Next

#541

From: Clement Vaillancourt
Date: Tue, 14 Aug 1990 16:57

20 lines
1460 bytes

I have a CS200 terminal server on one subnet and the NCS on the
other subnet of my Cisco. My Cisco have two ethernet interfaces.

How can I boot a CS200 terminal server running TCP/IP software
from a NCS across subnets. Those were made by Bridge Communication now 3Com.
The NCS is a PC running Xenix and it's job is to download the
resident software in the ram's of the terminal server.

Even if those two boxes run TCP, I think some XNS is involved at
boot time. What configuration is required in the Cisco?

I still have about 20 of those terminal servers and I will replace them
with Cisco when new money comes. Support from 3Com is /dev/null.

Thanks, Clem.
--
   Clement Vaillancourt,             |   Institut de Recherche d'Hydro-Quebec
   Network Manager                   |        1800 Montee Ste-Julie, Varennes
                                     |             P. Quebec, Canada, J3X 1S1
   Email: vaillan@ireq.hydro.qc.ca   |  Tel: 514-652-8238 / Fax: 514-652-8309

Technical Details

Message-ID: <2444@s3.ireq.hydro.qc.ca>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!clyde.concordia.ca!s3!vaillan

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!clyde.concordia.ca!s3!vaillan
From: vaillan@ireq.hydro.qc.ca (Clement Vaillancourt)
Newsgroups: comp.dcom.sys.cisco
Subject: Cisco configuration to boot 3Com terminal servers across subnets
Message-ID: <2444@s3.ireq.hydro.qc.ca>
Date: 14 Aug 90 16:57:05 GMT
Sender: root@s3.ireq.hydro.qc.ca
Reply-To: vaillan@ireq.hydro.qc.ca ()
Organization: IREQ, Hydro-Quebec, QC, Canada
Lines: 20