Re: Serial interfaces IP number question

Article View: comp.dcom.sys.cisco

Article #551

Back to comp.dcom.sys.cisco Previous Next

#551

From: Jim Forster
Date: Wed, 15 Aug 1990 18:23

14 lines
889 bytes

Folks,

While it is true that you cannot ping unnumbered serial interfaces,
fortunately, the SNMP designers have designed things so that it *IS*
possible to query unnumbered interfaces using SNMP.  The SNMP packets are
aimed at any IP address of the router, and refer to interface numbers
(i.e., the 1st, or 2nd, interface).  Another effect of this is that
you can use SNMP to query about non-IP speaking interfaces.

 -- Jim Forster
    cisco Systems


PS: It is not possible to netboot a router over an unnumbered serial line.

Technical Details

Message-ID: <24800@boulder.Colorado.EDU>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!aplcen!uakari.primate.wisc.edu!zaphod.mps.ohio-state.edu!ub!boulder!daemon

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!aplcen!uakari.primate.wisc.edu!zaphod.mps.ohio-state.edu!ub!boulder!daemon
From: forster@cisco.com (Jim Forster)
Newsgroups: comp.dcom.sys.cisco
Subject: Re: Serial interfaces IP number question
Message-ID: <24800@boulder.Colorado.EDU>
Date: 15 Aug 90 18:23:49 GMT
Sender: daemon@boulder.Colorado.EDU
Lines: 14