Re: Cisco configuration to boot 3Com terminal servers across subnets

Article View: comp.dcom.sys.cisco

Article #566

Back to comp.dcom.sys.cisco Previous Next

#566

From: Greg Satz
Date: Sat, 18 Aug 1990 17:33

11 lines
831 bytes

I recall that the protocol that Bridge/3com devices use to boot from can
only be bridged. Unfortunately I do not recall what protocol it is. Maybe
someone else on this list can help out?  If you have some sort of ethernet
monitor you can easily determine what protocol the devices emit when they
try to boot. This requires that you have the bridging software option in
your cisco routers.

Contact customer-service@cisco.com if you have any questions.

Greg Satz
cisco

Technical Details

Message-ID: <24890@boulder.Colorado.EDU>

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!news-server.csri.toronto.edu!mailrus!ncar!boulder!daemon

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!news-server.csri.toronto.edu!mailrus!ncar!boulder!daemon
From: satz@cisco.com (Greg Satz)
Newsgroups: comp.dcom.sys.cisco
Subject: Re: Cisco configuration to boot 3Com terminal servers across subnets
Message-ID: <24890@boulder.Colorado.EDU>
Date: 18 Aug 90 17:33:05 GMT
Sender: daemon@boulder.Colorado.EDU
Lines: 11