Re: Routing thru X.25 from a cisco to a Sun?

Article View: comp.dcom.sys.cisco

Article #586

Back to comp.dcom.sys.cisco Previous Next

#586

From: G. Mussar
Date: Tue, 21 Aug 1990 00:19

9 lines
941 bytes

I've have connected Suns running the Sunlink x25manager software to
Ciscos through X.25 packet networks. It works just fine (so far). I
don't have enough equipment (ie. Suns) to network them together and
the use one as a gateway router to the X.25 network/Cisco, but, it is
quite feasible.
--
-------------------------------------------------------------------------------
Gary Mussar  |Bitnet:  mussar@bnr.ca                  |  Phone: (613) 763-4937
BNR Ltd.     |  UUCP:  ..uunet!bnrgate!bcars53!mussar |  FAX:   (613) 763-2626

Technical Details

Message-ID: <1990Aug21.001946.19741@bigsur.uucp>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!cunews!bnrgate!bigsur!bcars53!mussar

References: <24926@boulder.Colorado.EDU>

Show Full Headers

Complete Article Headers

Newsgroups: comp.dcom.sys.cisco
Path: arc1-ca.pugleaf.net!utzoo!utgpu!cunews!bnrgate!bigsur!bcars53!mussar
From: mussar@bcars53.uucp (G. Mussar)
Subject: Re: Routing thru X.25 from a cisco to a Sun?
Message-ID: <1990Aug21.001946.19741@bigsur.uucp>
Sender: news@bigsur.uucp (Usenet)
Organization: Bell-Northern Research, Ottawa, Canada
References: <24926@boulder.Colorado.EDU>
Date: Tue, 21 Aug 90 00:19:46 GMT

Reply to Parent Message