NCSA Telnet 2.3 SLIP code?

Article View: comp.dcom.sys.cisco

Article #631

Back to comp.dcom.sys.cisco Previous Next

#631

From: Jim McCauley
Date: Thu, 06 Sep 1990 18:20

18 lines
1145 bytes

Dear cisco:

According to the chatter on other newsgroups (especially the Macintosh
communications group), some bright soul at cicso has modified NCSA
Telnet 2.3 for the Macintosh to do SLIP.  Is this true?

If so, would that person or an associate please post the diffs to the
NCSA source to comp.sources.mac, or post the modified application on
comp.binaries.mac, or simply mail the delightful beast to me?  This
could be a very handy tool for testing SLIP (and possibly PPP?)
implementations.

Jim McCauley          jem@hpulpcu3.cup.hp.com       (408) 447-4993
Learning Products Engineer
Hewlett Packard Company, Open Systems Software Division
MS 48SO, 19447 Pruneridge Avenue, Cupertino CA  95014
Disclaimer: My opinions are my own, not my employer's.

Technical Details

Message-ID: <28080001@hpisod2.HP.COM>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!sdd.hp.com!hplabs!hpda!hpcupt1!hpisod2!jem

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!sdd.hp.com!hplabs!hpda!hpcupt1!hpisod2!jem
From: jem@hpisod2.HP.COM (Jim McCauley)
Newsgroups: comp.dcom.sys.cisco
Subject: NCSA Telnet 2.3 SLIP code?
Message-ID: <28080001@hpisod2.HP.COM>
Date: 6 Sep 90 18:20:29 GMT
Organization: Hewlett Packard, Cupertino
Lines: 18