Re: T1 MUXing within your cisco box

Article View: comp.dcom.sys.cisco

Article #721

Back to comp.dcom.sys.cisco Previous Next

#721

From: Juha Heinanen
Date: Wed, 19 Sep 1990 16:26

16 lines
1085 bytes

The problem of a rats nest of cables to the T1 mux can be solved by
replacing the T1 mux with a Frame Relay switch.  Ask when your
favorite carrier can provide Frame Relay backbone service. Cisco will
have Frame Relay cabability in 8.2.

TDM technology is old fashioned one of the reason being the one you
mentioned (ie. lack of addressability).  Another reason is that fixed
bandwith (the sum of which <= T1) has to be allocated for each
connection.

-- Juha

--
--	Juha Heinanen, Tampere Univ. of Technology, Finland
	jh@tut.fi (Internet), tut!jh (UUCP), jh@tut (Bitnet)

Technical Details

Message-ID: <JH.90Sep19182608@etana.tut.fi>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!snorkelwacker!bloom-beacon!eru!hagbard!sunic!news.funet.fi!tut!jh

References: <32721.26f6c1b6@ccavax.camb.com>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!snorkelwacker!bloom-beacon!eru!hagbard!sunic!news.funet.fi!tut!jh
From: jh@tut.fi (Juha Heinanen)
Newsgroups: comp.dcom.sys.cisco
Subject: Re: T1 MUXing within your cisco box
Message-ID: <JH.90Sep19182608@etana.tut.fi>
Date: 19 Sep 90 16:26:08 GMT
References: <32721.26f6c1b6@ccavax.camb.com>
Sender: news@funet.fi (#News )
Organization: Tampere Univ. of Technology, Finland.
Lines: 15
In-Reply-To: bruce@ccavax.camb.com's message of 19 Sep 90 04:54:14 GMT

Reply to Parent Message