Re: wrl@wdl1.wdl.loral.com and LAT

Article View: comp.dcom.sys.cisco

Article #99

Back to comp.dcom.sys.cisco Previous Next

#99

From: Gary Kunis
Date: Fri, 07 Aug 1992 15:04

18 lines
651 bytes


Bill,

Your config will route IP, DECnet, A/Talk, and IPX.  It will bridge
LAT and anything else.

If you want to bridge only LAT, use the following config:

interface ethernet 0
bridge-group 1
bridge-group 1 input-type-list 201

bridge 1 protocol dec
access-list 201 permit 0x6004 0x0000
access-list 201 deny 0x0000 0xFFFF

  -- Gary --

Technical Details

Message-ID: <9208071504.AA22141@ash.cisco.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!sun-barr!ames!agate!boulder!recnews

Show Full Headers

Complete Article Headers

Newsgroups: comp.dcom.sys.cisco
Path: arc1-ca.pugleaf.net!sparky!uunet!sun-barr!ames!agate!boulder!recnews
From: Gary Kunis <gkunis@cisco.com>
Subject: Re: wrl@wdl1.wdl.loral.com and LAT
Message-ID: <9208071504.AA22141@ash.cisco.com>
Sender: news@colorado.edu
Date: 7 Aug 92 08:04:27 -0700
Lines: 18