IP Routing

Thread View: comp.dcom.sys.cisco

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by sandals Thu, 13 Mar 1997 00:00

#2010

Author: sandals
Date: Thu, 13 Mar 1997 00:00

27 lines
2011 bytes

I have a Netware 3.12 server with two IP bounded network cards.
Both cards have unique IP addresses. My problem is that only the
segment physically connected to my SCO Unix server can access the
SCO unix server. However the workstations on the segment that I
have name Front cannot access the SCO server.

From the SCO server side, if I do a ping on both network cards on
my Novell server, it can communicate with them. If I physically
connect the network called front to my SCO server, I can log into
it. However, trying to connect both cards to the same SCO server
causes me to get a router configuration error at the Novell
console.

Loading TCPCON shows me that ip traffic is being received and
Transmitted. However IPForwards always equals 0 and there is no TCP
traffic.

At the workstation end I am using dejatnt. The workstation internet
address is being set using custom netdev or bootttp.



Any help with this problem will be appreciated.

-------------------==== Posted via Deja News ====-----------------------
      http://www.dejanews.com/     Search, Read, Post to Usenet

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads