Re: Cisco configuration to boot 3Com terminal servers across subnets

Thread View: comp.dcom.sys.cisco

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by John Loiacono IV Sun, 19 Aug 1990 07:38

#572

Author: John Loiacono IV
Date: Sun, 19 Aug 1990 07:38

14 lines
946 bytes

> I recall that the protocol that Bridge/3com devices use to boot from can
> only be bridged. Unfortunately I do not recall what protocol it is. Maybe
> someone else on this list can help out?  If you have some sort of ethernet
> monitor you can easily determine what protocol the devices emit when they
> try to boot. This requires that you have the bridging software option in
> your cisco routers.
> 
> Greg Satz

If you can filter on Ethernet packet type, try the values 9001 and 9002.
I am pretty sure this is all you need.

jliv
SFSU

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads