Thread View: comp.dcom.sys.cisco
3 messages
3 total messages
Started by John Matthews
Tue, 04 Sep 1990 17:30
Possible Heat Problems
Author: John Matthews
Date: Tue, 04 Sep 1990 17:30
Date: Tue, 04 Sep 1990 17:30
21 lines
1768 bytes
1768 bytes
Can someone comment on the cooling requirements for the CGS?
The problem that we are having is that ever since we swapped out a
AGS for a CGS in our main phone closet, we have been having problems
with our T1 circuit to the internet. It has been going down like
clock work during the past three weekends and it comes back up
on Monday morning. Our facilities group turns off all air conditioning
in this area on the weekends and it does get quite hot in there. I
originally thought that I had pinned it down to being a bad modem, but
now that I am using a second modem and still seeing the same problems,
I'm not sure. Our original modem was just returned and CASE/DataTel
says there's nothing wrong with it. Has anyone seen CASE/DataTel
modems not work when they get hot and then start working again when
they cool off? How about the same question for the CGS?
The reason I am suspicious of the modems is that one day we were
having this problem and I swapped the modem out and then everything
worked fine. I am wondering if the fan in the previous AGS was keeping
everything cool and now that it's gone, the air around the modem isn't
being circulated as much. Sound strange? It is!!!
Thanks in advance,
John Matthews
matthews@uswat.uswest.com
Re: Possible Heat Problems
Author: Kent England
Date: Wed, 05 Sep 1990 13:31
Date: Wed, 05 Sep 1990 13:31
28 lines
1668 bytes
1668 bytes
In article <10832@uswat.UUCP> matthews@uswat.uswest.com (John Matthews) writes: > > ... I am wondering if the fan in the previous AGS was keeping >everything cool and now that it's gone, the air around the modem isn't >being circulated as much. Sound strange? It is!!! > Thanks in advance, > John Matthews > matthews@uswat.uswest.com The AGS fan is a wonder. It has the airflow to cool a large machine room. We use a spare AGS chassis and a long extension cord as a leaf blower in the fall. It has saved us spending $600 on a dedicated leaf-blower. Be careful not to place any loose papers near an AGS chassis. The AGS has a hell of a pull and thin papers can get sucked in and shredded. But it is not a good general purpose shredder; it won't handle more than three sheets at a time. The AGS is also an acceptable background noise generator, but it could be better if the fan noise was a little "whiter". I expect your AGS was cooling the entire closet and the CGS just can't do that. This is why an AGS is worth the extra ~$6k cisco charges. --Kent Disclaimer: I don't always use enough smileys :-)
Re: Possible Heat Problems
Author: Charles Hedrick
Date: Thu, 06 Sep 1990 03:30
Date: Thu, 06 Sep 1990 03:30
11 lines
1060 bytes
1060 bytes
> The AGS fan is a wonder. It has the airflow to cool a large >machine room. We use a spare AGS chassis and a long extension cord as >a leaf blower in the fall. It has saved us spending $600 on a >dedicated leaf-blower. Remember that the original AGS was designed by Len Bosack, who involved in the design work behind the original KL-10 processor. At a DECUS meeting, a user complained about the loud fans in the KL-10. The DEC representative explained, "yes, but you have to understand that the KL-10 was originally designed as a hovercraft." Perhaps some of the design philosophy has carried over...
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads