Re: LAT-Telnet Translation over Ethernet Media

Thread View: comp.dcom.sys.cisco

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Greg Satz Fri, 07 Sep 1990 09:33

#629

Author: Greg Satz
Date: Fri, 07 Sep 1990 09:33

11 lines
1009 bytes

The primary reason for getting a CSC/3 processor is for the larger memory.
A CSC/2 processor will work just fine in the MGS and CGS boxes provided the
routing tables don't grow too large. If you are passing around the entire
catenet and you are running lots of different protocols, you may experience
some memory congestion when the software is running out of RAM. This is
more a function of the environment outside of the chassis then the actual
chassis itself. We also have software that will run from ROM leaving all of
RAM available for routing tables, etc. This will allow the CSC/2 processor
to function for some time to come.

Greg

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads