[jh@tut.fi (Juha Heinanen): LAT-Telnet / Telnet-LAT in a router]

Thread View: comp.dcom.sys.cisco

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by WilliamChops Westfield Tue, 11 Sep 1990 01:35

#661

Author: WilliamChops Westfield
Date: Tue, 11 Sep 1990 01:35

17 lines
1177 bytes

    What we would need is a TELNET/LAT translator integrated in a router
    so that one could run LAT over any part of the Internet, ie.
    LAT-TELNET in the source router and TELNET-LAT at the destination.
    This would solve the problem of running LAT over long distance when
    bridging is for some reason or other out of question.

You can certainly do this sort of protocol translation.  Currently
it requires two boxes (a router and a CPT).  The CPT can convert
LAT->TCP and TCP->LAT on it's ethernet interface, and the TCP can
be routed over an arbitary IP network.  Similar conversion to/from
X.25 is possible, but you need to add an X.25 interface to the router,
and have it switch calls to/from the CPT.

Bill Westfield
cisco Systems.
-------

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads