Re: dds line performance, what's good and bad? (fwd)

Thread View: comp.dcom.sys.cisco

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Allan Leinwand Tue, 11 Sep 1990 17:04

#668

Author: Allan Leinwand
Date: Tue, 11 Sep 1990 17:04

28 lines
1377 bytes

Hello Michael,

   It is no uncommon for leased lines to have errors, especially those
inflicted by the provider...  

>Should I be worried about the magnitude of any of these counts or
>about the disparity between the two directions?

   I do not think the magnitude is a great problem.  Did you ever
disconnect the serial cable from the cisco during this week?  If you
disconnect the cable, the interface may see additional aborts.  If the
cable has never left the cisco, and the link was always operational
during the week, the question to ask is: Is the rate of errors
greater than 1% of the total amount of data transfered?  If the numbers
you showed us conern the transmission of 200Kb over the link, you may
have a problem.  If the numbers relate to 800Mb transfered over the
link, you might not have any concerns.


Thanks,

Allan Leinwand
cisco Systems
leinwand@cisco.com
(415) 688-7653

"Time was invented so that everything does not happen at once."
                    - Buckaroo Banzai

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads