(none)

Thread View: comp.dcom.sys.cisco

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Larry Byczynski Mon, 17 Sep 1990 16:13

#706

Author: Larry Byczynski
Date: Mon, 17 Sep 1990 16:13

20 lines
1429 bytes

Greetings from Delaware,

I have a dilemma that I am trying to cheaply solve and I am 
hoping that someone out there can help.  We purchased our cisco
units before the MCI cards were released a little over two years
ago.  We are using the old CSC-T cards at speeds of 256k.  Originally,
we were told that we could have more than four V.35 ports/2 CSC-T Cards 
in one unit.  We found that we could not physically mount more than
two appliques in one unit and we just let the issue drop.  Recently, I
have been playing around with the idea again and was able to mount six
V.35 ports/3 appliques/3 CSC-T cards in one unit.  Unfortunately, the
software does not like this arrangement.  The message I receive is similar
to "Lockup of serial 0/1 or incorrect firmware version."  My question:
Is it possible to have three CSC-T cards in one AGS and if so how?  Is anyone
doing this?  By having six V.35 ports in one box, I can free up a CGS for use
elsewhere.  Of course, I could also purchase a new MCI card with four ports
for 7100.00 .  Any help is much appreciated.  Thanks!

Larry A. Byczynski 
byczynsk@huey.udel.edu

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads