Article View: comp.dsp
Article #1002Re: DSP help please!!
From: Sakari Mattila
Date: Tue, 16 Oct 1990 08:29
Date: Tue, 16 Oct 1990 08:29
18 lines
1193 bytes
1193 bytes
At first, get copies of Texas Instruments Digital Signal Processing
Applications with the TMS320 Family, parts 1, 2 and 3. Next, get a
simulator and assembler for the DSP processor you are going to use.
In my humble opinion, the least expensive way to get into DSP is to
use a PC clone (a real IBM PC/XT will do), run assembler and simulator on
it and to build or buy the hardware with interface to the PC (either
via Centronics interface or with bus interface).
I prefer MOtorola 56001 because of its 24 wordlenght and Crystal A/D
converters because of in-built anti-aliasing filter (ie. oversampling
system).
--
Sakari M. Mattila 71307.1525@CompuServe.COM
mattila@tik.vtt.fi Sakari Mattila@3:663*371.0.FNET
Technical Details
Message-ID:
<5191@hemuli.tik.vtt.fi>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!rice!uupsi!sunic!kth.se!hemuli.tik.vtt.fi!samReferences:
<1194@xenon.kcl-cs.UUCP>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!rice!uupsi!sunic!kth.se!hemuli.tik.vtt.fi!sam From: sam@hemuli.tik.vtt.fi (Sakari Mattila) Newsgroups: comp.dsp Subject: Re: DSP help please!! Message-ID: <5191@hemuli.tik.vtt.fi> Date: 16 Oct 90 08:29:24 GMT References: <1194@xenon.kcl-cs.UUCP> Organization: Technical Research Centre of Finland, Laboratory for Information Processing (VTT/TIK) Lines: 18