Re: Using system ID for FIR filter design?

Article View: comp.dsp

Article #1106

#1106

From: Maurice Givens
Date: Tue, 13 Nov 1990 14:02

8 lines
776 bytes

You can do what you wish by using an adaptive filter.  Use
the adaptive filter in a system identification configuratio,
and use white noise as an input.  The adaptive filter will
adjust its coefficients to match that of the bandpass filter.

Also, if you know the transfer function of the desired filter,
the adaptive filter will calculate the coefficients needed
for implementation.

Technical Details

Message-ID: <4543@tellab5.tellabs.com>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!tellab5!maury

References: <4973@tekfdi.FDI.TEK.COM>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!tellab5!maury
From: maury@tellabs.com (Maurice Givens)
Newsgroups: comp.dsp
Subject: Re: Using system ID for FIR filter design?
Message-ID: <4543@tellab5.tellabs.com>
Date: 13 Nov 90 14:02:00 GMT
References: <4973@tekfdi.FDI.TEK.COM>
Sender: news@Tellabs.COM
Organization: Tellabs, Inc. Lisle IL
Lines: 8

Reply to Parent Message