Article View: comp.dsp
Article #1108DSP56001 BS&WT
From: Norbert Hanke
Date: Tue, 13 Nov 1990 16:24
Date: Tue, 13 Nov 1990 16:24
14 lines
869 bytes
869 bytes
In the DSP56001 DSP User's Manual there's a description of the use of the Bus Request / Bus Grant lines as Bus Strobe and Wait, respectively. On page 9-14 one reads "the setup and hold times are provided in the DSP56001 Advance Information Data Sheet (ADI1290)". Looking into that data sheet, nothing is mentioned about using these pins for that purpose. Does anybody know something about the exact timing requirements of these pins as BS / WT? Any help is highly appreciated! Norbert Hanke ETH Zurich
Technical Details
Message-ID:
<14608@neptune.inf.ethz.ch>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!samsung!uunet!mcsun!cernvax!chx400!ethz!neptune!iiic.ethz.ch!nhankeShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!samsung!uunet!mcsun!cernvax!chx400!ethz!neptune!iiic.ethz.ch!nhanke From: nhanke@iiic.ethz.ch (Norbert Hanke) Newsgroups: comp.dsp Subject: DSP56001 BS&WT Message-ID: <14608@neptune.inf.ethz.ch> Date: 13 Nov 90 16:24:01 GMT Sender: news@neptune.inf.ethz.ch Lines: 14