Need a general-purpose DSP card for PC/AT bus

Article View: comp.dsp

Article #113

#113

From: Pat Noziska
Date: Tue, 21 Jul 1992 05:57

20 lines
1237 bytes

Does ANYONE out there sell a general-purpose DSP card for the PC/AT bus?
By general-purpose, I mean: 

	1. Has an Open architecture (i.e. one which will allow me to 
		write ANY kind of DSP code I want and make it work on the board)
	2. Not originally designed for a specific purpose (such as voice or fax)
	3. Has an RJ-xx interface (which sorta violates my second criterion,
	but it's what I would prefer). Telephony interface is a plus.
	

I'm hoping I can find a prefab, plug-and-program board, but if no such board
exists, I will entertain comments on the merits of, and recommendations of,
the available  DSP board prototyping and development kits out there for the
AT bus.

Thanks in advance for your help.


-- 
Pat Noziska

Technical Details

Message-ID: <1992Jul21.055757.8327@qiclab.scn.rain.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!cs.utexas.edu!swrinde!mips!pacbell.com!network.ucsd.edu!ogicse!qiclab!noziska

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!cs.utexas.edu!swrinde!mips!pacbell.com!network.ucsd.edu!ogicse!qiclab!noziska
From: noziska@qiclab.scn.rain.com (Pat Noziska)
Newsgroups: comp.dsp
Subject: Need a general-purpose DSP card for PC/AT bus
Summary: Need a general-purpose DSP card for PC/AT bus
Keywords: DSP , gneral purpose, PC bus
Message-ID: <1992Jul21.055757.8327@qiclab.scn.rain.com>
Date: 21 Jul 92 05:57:57 GMT
Organization: SCN Research/Qic Laboratories of Tigard, Oregon.
Lines: 20