Re: DSP boards for PCs (another question)

Article View: comp.dsp

Article #1419

#1419

From: Larry Granroth
Date: Wed, 09 Jan 1991 16:54

15 lines
1264 bytes

(I've just started following this group . . .)

We have an application where we would like to digitize two simultaneous
data streams with 8-bit resolution at 100kHz sampling rate, plus one or
two auxiliary channels at 4-bit resolution at the same rate.
This needs to be done continuously for about two hours at a time, so
we need to output to a device that will accept that sustained data rate and
have sufficient capacity.  Current SCSI 8mm tape drives should do the
job.  Does anyone know of A/D hardware/software that we could use,
preferably with an ISA PC?  The board would need to be able to handle
a direct SCSI connection to the 8mm storage device.

Thanks for any pointers.

-Larry    Granroth@IowaSP.physics.UIowa.edu    IOWASP::GRANROTH

Technical Details

Message-ID: <1991Jan9.105453.418@iowasp.physics.uiowa.edu>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!zaphod.mps.ohio-state.edu!maverick.ksu.ksu.edu!iowasp.physics.uiowa.edu!granroth

References: <18732@shlump.nac.dec.com> <10069@pasteur.Berkeley.EDU> <59419@aurs01.UUCP>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!zaphod.mps.ohio-state.edu!maverick.ksu.ksu.edu!iowasp.physics.uiowa.edu!granroth
From: granroth@iowasp.physics.uiowa.edu (Larry Granroth)
Newsgroups: comp.dsp
Subject: Re: DSP boards for PCs (another question)
Message-ID: <1991Jan9.105453.418@iowasp.physics.uiowa.edu>
Date: 9 Jan 91 16:54:53 GMT
References: <18732@shlump.nac.dec.com> <10069@pasteur.Berkeley.EDU> <59419@aurs01.UUCP>
Organization: Department of Physics and Astronomy, University of Iowa
Lines: 15

Reply to Parent Message