Re: Digital Filter Design Software

Article View: comp.dsp

Article #1628

#1628

From: Norbert Hanke
Date: Thu, 28 Mar 1991 11:43

22 lines
1467 bytes

In article <2345@gonzales.munsell.UUCP> ada@munsell.UUCP (Andy Adams) writes:
>
>        I am trying to design fairly large (16->32 tap) FIR
>        filters for image sharpness correction/enhancement. Ideally,
>        I would like to be able to specify filter gains at various
>        frequencies and have the program optimally design the coeffs.
>        The band-edge, band-gain, band-ripple approach of CARL
>        seems to be very awkward and unpredictable for this 
>        type of filter design. 

Try to use them Remez Exchange Algorithm, if you want to design linear
phase filters.

Internally, Remez builds a large grid of the specified frequencies, each
point having its desired value and the weight. It should be possible to
adapt Remez in a way to allow for arbitrary frequency responses, not just
the band-edge, band-gain, band-weight approach.

Norbert Hanke
Power Electronics &
Electrometrology
ETH Zurich, Switzerland

Technical Details

Message-ID: <1991Mar28.114331.8849@bernina.ethz.ch>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!mcsun!cernvax!chx400!chx400!bernina!hanke

References: <2345@gonzales.munsell.UUCP>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!mcsun!cernvax!chx400!chx400!bernina!hanke
From: hanke@nessie.cs.id.ethz.ch (Norbert Hanke)
Newsgroups: comp.dsp
Subject: Re: Digital Filter Design Software
Keywords: DSP, FIR, Filter Design
Message-ID: <1991Mar28.114331.8849@bernina.ethz.ch>
Date: 28 Mar 91 11:43:31 GMT
References: <2345@gonzales.munsell.UUCP>
Sender: news@bernina.ethz.ch (USENET News System)
Organization: ETH Zuerich
Lines: 22
Nntp-Posting-Host: nessie

Reply to Parent Message