Article View: comp.dsp
Article #1812Re: DSP and Control
From: Jinghong CHEN
Date: Thu, 19 Nov 1992 22:29
Date: Thu, 19 Nov 1992 22:29
24 lines
1674 bytes
1674 bytes
In article <1ednj3INNnup@daisy.ee.und.ac.za> spaday@daisy.ee.und.ac.za (Strini Padayachee) writes: >Hi > >I'm an EE grad with a control system background and the work I'm going to be doing is DSP. I'd like to know what the differences and similarities are between >these two fields. What distinguishes a Control engineer from a SP engineer?? >Thanx > >Strini DSP can be considered as a small part of control. The main differences, as far as I can consider, are (1) DSP mainly deals with signals rathan than systems (i.e. control focuses on transfer functions, DSP focuses on FFTs). (2) The signals which DSP will handle are much faster than the signals in process control. --------------------------------------------------------------------------- J.CHEN |E-MAIL: jchen@tomahawk.me.gu.edu.au School of Microelectronic Engineering| Phone: +61-7-8755050 Faculty of Science and Technology | Fax: +61-7-8755198 Griffith University | Fax: +61-7-8755050 Nathan, QLD 4111, Australia | --------------------------------------------------------------------------- -- ehunjfnlkdf dfdfjnlkdfl
Technical Details
Message-ID:
<1992Nov19.222938.28354@griffin.itc.gu.edu.au>Path:
arc1-ca.pugleaf.net!sparky!uunet!olivea!sgigate!sgiblab!munnari.oz.au!bunyip.cc.uq.oz.au!griffin!tomahawk.me.gu.edu.au!jchenReferences:
<1ednj3INNnup@daisy.ee.und.ac.za>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!sparky!uunet!olivea!sgigate!sgiblab!munnari.oz.au!bunyip.cc.uq.oz.au!griffin!tomahawk.me.gu.edu.au!jchen From: jchen@tomahawk.me.gu.edu.au (Jinghong CHEN) Newsgroups: comp.dsp Subject: Re: DSP and Control Message-ID: <1992Nov19.222938.28354@griffin.itc.gu.edu.au> Date: 19 Nov 92 22:29:38 GMT References: <1ednj3INNnup@daisy.ee.und.ac.za> Sender: news@griffin.itc.gu.edu.au Organization: Griffith University, Brisbane, Australia Lines: 24 Nntp-Posting-Host: tomahawk.me.gu.edu.au