🚀 go-pugleaf

In article <1fjgtjINN7nt@agate.berkeley.edu>,
sriram@doppler.berkeley.edu (S. Sriram) writes:
|>Hi there,
|>
|>I was wondering if there are any add-on IO interface cards
|>available for the Motorola DSP96000ADS ( application
|>development system for the DSP96K). I am interested in 
|>A/D,D/A cards, serial interfaces and such.  
|>
|>Thanks,
|>Sriram.
|>
We are developing hardware that can be used together with the
96000ADSA.
Using a backplane for the edge connector (96) the modules can be used
all together.
We are using and developing the following modules:

ADC/Board with 2 channels, both with 16 Bit and 166kS/s.
TimerBoard with three timers for IRQA/B/C, fully programmable.
Digital I/O, each 32Bit wide, LEDs for current status.
Incremental interface (especially for angular encoders) with count up
and down (up to about 17Mhz)
Fully programmable square wave generator.

Additional cards will also be developed.
Bye
Dipl.-Ing. Gander Helmut
Vienna University of Technology
Institute of Flexible Automation
Group RobTec
Gusshausstr. 27-29/361
A-1040 Vienna
Austria
EUROPE
hg@flexaut.tuwien.ac.at
helmut@efasp1.tuwien.ac.at
helmut@efasp2.tuwien.ac.at