🚀 go-pugleaf

In article <3504@radio.oakhill.UUCP> you write:
>
>I would like to use an IIR filter in a particular application.  I 
>also need linear phase response.  Does anyone have any good references
>to papers/books/chapters concerning digital phase correction for
>IIR filters.  I can't use an FIR in place of the IIR because it is
>a switched capacitor design and must be kept simple.  I CAN however
>use a small FIR or an IIR to digitally correct the phase...additionally,
>the phase ripple can be as high as +-10 degrees and still be considered
>acceptable correction. Any help would be apprieciated.
> 
> -Charlie Thompson

A solution to your problem could be Allpass Filters. With Allpass' you
can design approximately linear phase filters. Some good references :

S.K.Mitra,K. Hirano : Digital All-Pass Networks, IEEE Trans. on
Circuits and Systems, Vol. Cas-21, pp. 688-700, No.5, September 1974.

M.Renfors, T.Saram{ki : A Class of Approximately Linear Phase Digital
Filters Composed of Allpass Subfilters. Was presented at IEEE Int.
Symp. Circuits Syst. (San Jose, CA), May 1986.

# Risto Kotalampi rk76073@tut.fi   # Phones :                           #
# Tampere University of Technology # Work (room SL 212) : (931) 162 921 #
# Signal Processing Laboratory     # Home               : (931) 615 025 #
# P.O.Box 527, 33101 TAMPERE       # Radioclub (SH 101) : (931) 162 010 #