Dr. BuB login instructions

Thread View: comp.dsp

3 messages

[T] Back to Threads [V] Tree View [G] Group Articles

3 total messages Started by John Fisher Tue, 05 Mar 1991 20:24

#1523

Author: John Fisher
Date: Tue, 05 Mar 1991 20:24

21 lines
1401 bytes

Someone recently requested information on how to log onto Motorola's
DSP bulletin board, Dr. BuB.  Here are the instructions:

1. Dial 
	(512) 891-DSP1 (891-3771) to access Bell 212A modems, 
  	(512) 891-DSP2 (891-3772) to access V.22 modems, or 
  	(512) 891-DSP3 (891-3773) for 2400 baud modems.
   Set the character format to 7 data, even parity, 1 stop bit.

2. After the connection has been established, respond to the prompt
   "Dr. BuB login:" with the word "guest" (lowercase required) followed
   by a carriage return.  No password is necessary; if the prompt
   "password" appears, simply hit carriage return.

3. Finally, identify your terminal type.  Terminal type is "dumb" if you
   have no terminal emulation software.  Otherwise select the terminal type
   from the list of over 100 terminals that are available.

By the way, new audio code has recently been posted including the digital 
graphic equalizer code that was previously published in Motorola's application
report APR2, "Digital Stereo 10-Band Graphic Equalizer Using the DSP56001."

Re: Dr. BuB login instructions

#1545

Author: Marcus "Bru" Bointon
Date: Thu, 07 Mar 1991 14:58

10 lines
927 bytes

In article <1991Mar5.202419.20433@oakhill.sps.mot.com> johnf@oakhill.sps.mot.com (John Fisher) writes:
>By the way, new audio code has recently been posted including the digital 
>graphic equalizer code that was previously published in Motorola's application
>report APR2, "Digital Stereo 10-Band Graphic Equalizer Using the DSP56001."

  I don't have access to this- could someone please Email the source for this to me please? (If it's not too big!)

	Thanks in advance,

				Marcus Bointon.

Re: Dr. BuB login instructions

#1542

Author: Henry Ptasinski
Date: Fri, 08 Mar 1991 19:08

5 lines
527 bytes

Is there any way to get Motorola DSP info via FTP?

Also, are there com.dsp archives anywhere?

Thanks,

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads