Thread View: comp.dsp
4 messages
4 total messages
Started by Jordan K. Hubbard
Wed, 03 Apr 1991 14:36
Need DSP developers board for IBM/PC compat.
Author: Jordan K. Hubbard
Date: Wed, 03 Apr 1991 14:36
Date: Wed, 03 Apr 1991 14:36
8 lines
683 bytes
683 bytes
Someone here needs a DSP board to do some signal processing, choice of DSP does not appear to be too important at the moment.. Can anyone give me the names of a few companies that offer such things? Standard AT bus.. Thanks. Jordan
Request for info for DSP/PC boards
Author: Ronald L. Buchholz
Date: Wed, 10 Apr 1991 17:16
Date: Wed, 10 Apr 1991 17:16
26 lines
1176 bytes
1176 bytes
Greetings-- I am interested in a DSP board for my 386SX machine with the following features (more or less): 1) Motorola 56001 DSP chip (a must) 2) The board must use either a short or long PC card-slot 3) A prototyping area 4) On board A/D-D/A converters with filters 5) Enough RAM and EEPROM to be usable A blank (unpopulated board) would be fine as long as proper documentation can be obtained to use it. My primary interest right now is audio. Can anyone out there recommend a manufacturer of such a device? Much thanks in advance. If there is sufficient interest, I will gladly summarize and post a list of responses. -- afdvcz
Re: Request for info for DSP/PC boards
Author: Mark Zenier
Date: Sat, 13 Apr 1991 19:37
Date: Sat, 13 Apr 1991 19:37
24 lines
1377 bytes
1377 bytes
In article <1991Apr10.171617.19360@chinet.chi.il.us>, buchholz@chinet.chi.il.us (Ronald L. Buchholz) writes: > I am interested in a DSP board for my 386SX machine with the following > features (more or less): > > 1) Motorola 56001 DSP chip (a must) > 2) The board must use either a short or long PC card-slot > 3) A prototyping area > 4) On board A/D-D/A converters with filters > 5) Enough RAM and EEPROM to be usable In both the April Radio-Electronics and Elektor Electronics, they had a press release for the "DSPerato" board. An IBM-XT adapter card layout with a 56001. About 2/3 of the card is prototype area. A/D converters are on a seperate plug in module/card. $299 for the basic card, $149 for the A/D card (two different flavors). $99 for the software pack. Signal Systems 15105 SE East Ave. Milwaukie, Oregon 97267 Anyone actually seen this board ? Mark Zenier markz@ssc.uucp mzenier@polari.uucp
Re: Request for info for DSP/PC boards
Author: Dana C. Massie
Date: Thu, 18 Apr 1991 17:23
Date: Thu, 18 Apr 1991 17:23
26 lines
1437 bytes
1437 bytes
In article <1991Apr10.171617.19360@chinet.chi.il.us>, buchholz@chinet.chi.il.us (Ronald L. Buchholz) writes: > I am interested in a DSP board for my 386SX machine with the following > features (more or less): > > 1) Motorola 56001 DSP chip (a must) > 2) The board must use either a short or long PC card-slot > 3) A prototyping area > 4) On board A/D-D/A converters with filters > 5) Enough RAM and EEPROM to be usable Ariel Corporation has a bunch of DSP boards for IBM, Mac, Sun, HP, VME using 56001, 320, 96000, i860, and ATT dsp32. They have perhaps the best interactive debugger for the 56001 and my experiences with the company have all been excellent. Contact Info: Ariel Corporation 433 River Road Highland Park, NJ 08904 tel: (201) 249-2900 fax: (201) 249-2123 dsp bbs: (201) 249-2124 dana c. massie dmassie@well.sf.ca.us
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads