🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

3 total messages Started by Frank Houston Wed, 06 Jan 1993 13:35
Price Range Of DSP
#2173
Author: Frank Houston
Date: Wed, 06 Jan 1993 13:35
15 lines
986 bytes
	Hello DSP land

	I am doing my phd in compiler work here at UVA. Does anyone know
the current prices Ti 320c33 , 21020, National Semi 64 Bit Chip.
Etc, I am most interested in the cheapest highest performance chip.

Thanx for any help

Frank Houston ( ThE MaD HaCkEr )
-- 
											 Frank Houston 
    								     |   University of Virginia
VOICE   : (804)982-2294                  |   Thornton / Comp Sci
Internet: fh8n@opal.cs.virginia.edu      |   Charlottesville Va 22901
Re: Price Range Of DSP
#2176
Author: Gints Klimanis
Date: Wed, 06 Jan 1993 20:08
12 lines
1103 bytes
In article <1993Jan6.133516.14312@murdoch.acc.Virginia.EDU>,
fh8n@uvacs.cs.Virginia.EDU (Frank Houston) writes:
|> 	Hello DSP land
|> 
|> 	I am doing my phd in compiler work here at UVA. Does anyone know
|> the current prices Ti 320c33 , 21020, National Semi 64 Bit Chip.
|> Etc, I am most interested in the cheapest highest performance chip.

~$30 for low quantities of TI 320C31 (what's the C33?).  ~$100 for 21020.
You really need price quotes from the manufacturers for a specified
clock rate, volume and time frame.  I think you'll find the 33 MHz C31
to be the greatest bang for the buck for floating point processors.
Re: Price Range Of DSP
#2195
Author: Urs Probst
Date: Sat, 09 Jan 1993 11:35
36 lines
2203 bytes
In article <1ife71INNiv1@fido.asd.sgi.com> gints@prophet.esd.sgi.com (Gints Klimanis) writes:
>In article <1993Jan6.133516.14312@murdoch.acc.Virginia.EDU>,
>fh8n@uvacs.cs.Virginia.EDU (Frank Houston) writes:
>|> 	Hello DSP land
>|> 
>|> 	I am doing my phd in compiler work here at UVA. Does anyone know
>|> the current prices Ti 320c33 , 21020, National Semi 64 Bit Chip.
>|> Etc, I am most interested in the cheapest highest performance chip.
>
>~$30 for low quantities of TI 320C31 (what's the C33?).  ~$100 for 21020.
>You really need price quotes from the manufacturers for a specified
>clock rate, volume and time frame.  I think you'll find the 33 MHz C31
>to be the greatest bang for the buck for floating point processors.
>

There is a low cost version of the 21020 available: The 21010. 

Quoting from AD's Q&A-Sheet:

"The ADSP-21010 is a low-entry-price part for floating point DSP at $49.9 for
 100 pieces. It has great performance - it does a 1024-point complex FFT in
 1.54 ms, which is twice the performance of TI's 320C31 for lower cost."

"Key differences between 21020 and 21010:
 a)The 21010 is a 32-bit only processor: it handels 32-bit IEEE Floating
    Point format and 32-bit Fixed Point format. [...] There is no 40-bit
    mode, but designers of low-cost systems would only want 32-bits anyway.
 b) Cycle time: 80ns cycle time versus the 21020's 40ns cycle time.

"The 21010 is software-compatible with the 21020 (source and object code).
 The 21010 will be pin-compatible with the 21020 in the PQFP package 
 (304 pins)."

304 pins, oh dear! But around 100 of them are Vdd, GND or nc.

-Urs Probst   probst@nessie.cs.id.ethz.ch  Zurich Switzerland
Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads