dsp32c coprocessor board for pc's

Thread View: comp.dsp

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Randy Nevin Sat, 14 Oct 1989 04:29

#458

Author: Randy Nevin
Date: Sat, 14 Oct 1989 04:29

33 lines
1854 bytes

people interested in dsp coprocessor boards for personal computers, read on;
otherwise, hit 'd' now



[the following is a blurb a friend of mine asked me to post to the dsp
newsgroup about one of his products. please call him if you're interested,
rather than replying to me. thx.]

For those interested in a good DSP32C development system, you might want to
look into the PC/AT coprocessor board offered by Symmetric Research.  They
feature a multilayer board, with a DSP32C cpu running at 40/50Mhz, and a
memory array that can be populated to 640K with standard 32Kx8 SRAMs.  The
dynamic range of the floating point arithmetic done by the DSP32C is a real
spoiler once you change over from the fixed point of earlier generation DSPs

Additional features of the board are:
	16 bit PC/AT bus interface
	2 memory mapped 32 bit parallel ports (fully buffered)
	includes assembler and monitor/debugger
	math library with fft's, matrix inverse, fir's
	EGA graphics library for displaying results
	all source code included

A 0K base board including all software is $950, with a full 640K of 100ns
memory costing an additional $400.  All the memory is socketed so many
different configurations are possible.  For more info, their phone number
is (206)828-6560.

Arpanet:   microsoft!randyn@beaver.cs.washington.edu
           or  microsoft!randyn@uunet.uu.net
Usenet:    ..uw-beaver!microsoft!randyn  or  ..uunet!microsoft!randyn
CompuServe:  INTERNET:randyn@microsoft

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads