LabView Instruments via FTP

Thread View: comp.dsp

3 messages

[T] Back to Threads [V] Tree View [G] Group Articles

3 total messages Started by Tom_J_Beckman Tue, 03 Nov 1992 18:26

#54

Author: Tom_J_Beckman
Date: Tue, 03 Nov 1992 18:26

8 lines
431 bytes

I'm looking for FTP sites where libraries of LabVIEW virtual instruments
can be found. Any help would be greatly appreciated. Thanks.

quit
ok
ok

ok

Re: LabView Instruments via FTP

#58

Author: Louis Demers
Date: Wed, 04 Nov 1992 01:00

16 lines
1052 bytes

In <68801@cup.portal.com> Tom_J_Beckman@cup.portal.com writes:

>I'm looking for FTP sites where libraries of LabVIEW virtual instruments
>can be found. Any help would be greatly appreciated. Thanks.

	They are available on the following machine
	
	Aliases:  ftp.natinst.com
	Name:    eagle.natinst.com
	Address:  130.164.1.2

-- 
| Louis Demers              | DREV, Defence Research Establishment,Valcartier |
| louis@asterix.drev.dnd.ca | POBox 8800, Courcelette,Quebec, CANADA, G0A 1R0 |
|            (131.132.48.2) | Office: (418) 844-4424       fax (418) 844-4511 |
+---------------------------+-------------------------------------------------+

Re: LabView Instruments via FTP

#1182

Author: George Vokalek
Date: Fri, 06 Nov 1992 03:57

31 lines
1988 bytes

In <1992Nov4.010015.15484@asterix.drev.dnd.ca> louis@asterix.drev.dnd.ca (Louis Demers) writes:

>>I'm looking for FTP sites where libraries of LabVIEW virtual instruments
>>can be found. Any help would be greatly appreciated. Thanks.

Speaking of Labview, does anyone have comments regarding its ability
to control RS232 instruments?  I am trying to determine just what it can
do over the serial port, especially with regard to data protocols and
baud rate.

For instance, is the RS232 character stream text oriented or binary oriented?
Does the user have complete control over the generation and interpretation
of RS232 data?

The system which I would like to control is a custom real-time controller
which currently talks to custom PC software at 57600bps.

I have the Labview Demo, which has all of the communication facilities
disabled.  Getting detailed information in Aus. seems to be difficult
at the moment due to a shortage of supplies to the local National Instruments
office.

I would appreciate any comments about Labview in this regard.

George.

--
George Vokalek,                                Dept. of Mechanical Engineering,
                                           University of Adelaide, GPO BOX 498, 
gvokalek@augean.eleceng.ua.oz.au                 Adelaide 5001, South Australia
                                         Phone 61-8-228-4704, Fax 61-8-224-0464

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads