Thread View: comp.emacs
2 messages
2 total messages
Started by an3523
Tue, 12 Jan 1993 00:58
model for .emacs file
Author: an3523
Date: Tue, 12 Jan 1993 00:58
Date: Tue, 12 Jan 1993 00:58
7 lines
779 bytes
779 bytes
Where is info available on how to set up an .emacs file (that is, the language/commands necessary) thanks ------------------------------------------------------------------------- To find out more about the anon service, send mail to help@anon.penet.fi. Due to the double-blind system, any replies to this message will be anonymized, and an anonymous id will be allocated automatically. You have been warned.
Re: model for .emacs file
Author: Gary Murphy
Date: Wed, 13 Jan 1993 05:14
Date: Wed, 13 Jan 1993 05:14
973 lines
33378 bytes
33378 bytes
an3523@anon.penet.fi writes:
>Where is info available on how to set up an .emacs file
>(that is, the language/commands necessary)
>thanks
Why would you post this anonymously? :-)
Ok, here is the .emacs I've used for years, which is actually
.Emacs.el, and virtually all the parts for this came from
documentation or from this newsgroup, so it is time I put somethi{g
back. What follows is the file I start with when I get to a new site,
and it contains numerous bits and pieces that were fixes and patches
from other sites; I make no warrantees for the robustness or the
appropriateness of this for your needs, and obviously, many of those
reading this will find parts that are just plain broken or missing
essential pieces.
The good news is this was cleaned up recently for internal
distribution with a company I was consulting with, and that means it
comes with instructions ... enjoy ...
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; .Emacs.el -- source for an auto-recompiling .emacs.elc
;;
;; 1988 by Gary Murphy (garym@cognos.uucp)
;; 1992 by Gary Murphy (gary.murphy@software.mitel.com or murphyg)
;; 1993 by Gary Murphy (garym@virtual.rose.utoronto.ca)
;;
;; This is a cleaned-up edition of my personal emacs start-up file, pieced
;; together over many difference sites over many years; I won't even pretend
;; to understand what most of this stuff means and you are on your own if you
;; want to customize anything.
;;
;; To save time on starting emacs (addressing a key complaint from vi-users)
;; I have my start-up stored as a self-recompiling file; the first time you
;; compile the file, you will have the overhead of the byte-compiler in memory
;; but on subsequent runs, unless the .Emacs.el changes, emacs will start
;; more quickly and will load without the compiler (unless you byte-compile
;; something else)
;;
;; useful tip: if you use X-Windows, load xemacs with a '-font screen' option
;;
;; Installation:
;;
;; 1) copy this file to .Emacs.el in your root directory
;;
;; 2) copy any relevant .el files from my home ~/emacs directory*
;; in particular, you may want the following:
;;
;; mail-aliases.el code-stuff.el gnus-speedups.el gnus-wrap.el
;; mail-abbrevs.el shell-complete.el
;;
;; * I am lobbying to have most of this moved to the emacs/lisp/local
;; directory where it belongs.
;;
;; 3) make a home emacs directory and add the following line to your .cshrc file:
;;
;; setenv EMACSLOADPATH ~/emacs:/usr/tools/emacs/lisp/local:/usr/tools/emacs/lisp
;;
;; 4) edit this file with emacs, changing occurances of USER to your login name
;; this is most easily done with the M-% command
;;
;; 5) M-x eval-current-buffer
;;
;; 6) have fun
;;
;; -- the planning is with the many; the decision is done alone --
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; detect out of date start-up file and recompile.
;; note that this will keep the byte-compiler loaded for the duration
;; of the new session.
(defun Wait! ()
"If ~/.Emacs.el exists and is newer than ~/.emacs, recompile it to ~/.Emacs.elc and move the compiled version to ~/.emacs."
(cond
((file-newer-than-file-p "~/.Emacs.el" "~/.emacs")
(let ((mode-line-format "") (mode-line-inverse-video nil))
(message "please standby: recompiling .Emacs.el ...")
(sit-for 1)
(byte-compile-file "~/.Emacs.el")
(rename-file "~/.Emacs.elc" "~/.emacs" t))
(load "~/.emacs" t t t)
(message ".emacs recompiled")
(sit-for 2)
)))
(Wait!)
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; standard libraries to be included ...
;; ------------------------------------------------------------------------
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Rmail -
;; This sets your emacs environment to use the M-x rmail command
;;
(setq rmail-primary-inbox-list (list "/usr/mail/garym"
(expand-file-name "~/Mail/mbox")))
;; set-up for the rmailout.el
;;
;; the output list will automagically set the file name when you save messages
;; in RMAIL format, something I almost never do ;-)
(setq rmail-output-directory (expand-file-name "~/Mail"))
(setq rmail-output-files-alist
'(
("Subj.*ISS" "ISS")
("-.*begin" "../ppa.new")
("To:.*pp[ac]" "mu")
("To:.*nativenet" "nn")
))
(load-library "rmailout")
;; change the quoting char and reply only to sender
(defun new-rmail-reply (recipients-too)
"Reply to the sender of the current message.
Prefix argument means CC: all other recipients of original message."
(interactive "P")
(rmail-reply (not recipients-too))
(mail-yank-original 0)
(goto-char 1)
(re-search-forward mail-header-separator nil t)
(replace-regexp "^" ">"))
;;; set up the z key to reply to sender & include message
(setq rmail-mode-hook
'(lambda ()
(define-key rmail-mode-map "z" 'new-rmail-reply)))
;; minibuffer command history on C-n C-p
;; (load-library "site/minibuf-mem")
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; automagically loaded libraries:
;; ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
;; You may or may not have these available at your site. If you are interested
;; in something here and it doesn't seem to exist, you can take a copy from
;; /home/staff/murphyg/emacs (if I have it)
;; - comments and source files
(autoload 'code-comment-mode "code-stuff.el"
"Major mode for adding comments to source code." t)
(autoload 'code-mode "code-stuff.el"
"Major mode for editing source code." t)
;; - a shell for each directory
(autoload 'sh "sh" "Shell mode with buffer per directory" t)
;; - shell completion
(autoload 'my-shell-complete "shell-complete" "shell completion" t)
(autoload 'my-shell-completion-help
"shell-complete" "shell completion list" t)
;; - get around the mitel rmail preempting:
;; (autoload 'rmail "/usr/tools/emacs/lisp/rmail" nil t)
;; - filename completion, even in shells or with envirnment vars
(autoload 'complete-filename "filename" nil t)
(setq shell-mode-hook
(function (lambda () (local-set-key "\^I" 'complete-filename))))
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; GNU Smalltalk system
(setq auto-mode-alist
(append '(("\\.st" . smalltalk-mode))
auto-mode-alist))
(autoload 'smalltalk-mode "/system/util/gnu/smalltalk-1.1/st.elc"
"GNU SmallTalk Version 1.1" t)
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; GNUS - emacs news reader
;;
;; I much prefer gnus over rn for handling my news. Admittedly it is
;; many times slower than rn, but if you get a copy of my speedup code
;; it is quite acceptable. You shouldn't be reading news anyway ;-)
(autoload 'gnus "gnus-wrap" "Network News." t)
(autoload 'gnus-post-news "gnuspost" "Posting Network News." t )
;;; set gnus up
(setq gnus-default-article-saver 'gnus-Subject-save-in-mail)
(setq gnus-default-distribution "na")
(setq gnus-interactive-post nil)
(setq gnus-auto-select-next "quietly")
(setq gnus-auto-center-subject nil)
;;; NOTE NOTE NOTE: the getenv "HOST" below gets an environment
;;; variable that is automagically set by the tcsh shell. If you use
;;; the csh shell, you can either change the (getenv "HOST") to
;;; "yourmachine" or you can add a line to your .login as follows:
;;; setenv HOST `hostname`
(setq gnus-nntp-server (getenv "HOST"))
(setq gnus-your-domain "Software.Mitel.COM")
;;; define your favorite description of your organization.
(setq gnus-your-organization "Applications Software II, MITEL Corporation, Kanata, Ontario, Canada")
(setq gnus-nntp-service nil)
(setq gnus-use-generic-from t)
(setq nnspool-active-file "/usr/spool/news/lib/active")
(setq nnspool-history-file "/usr/spool/news/lib/history")
;;; put your mail directory in here
(setq gnus-article-save-directory "~/Mail/")
(setq gnus-novice-user nil)
;;; hooks - got it from the net, don't remember what it does, but I
;;; remember wanting to use it.
(setq gnus-Article-mode-hook
'(lambda ()
(kill-local-variable 'global-mode-string)))
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; set-up unix and keybinding environment stuff
;;
;; because I like to use the backspace key, I bind help to M-x
;; rather than C-h
(setq lpr-command "print")
(setq lpr-switches (list "-2r"))
(setq tab-width 4)
(global-set-key "\b" 'delete-backward-char)
(global-set-key "\M-o" 'mark-paragraph)
(global-set-key "\M-h" 'help-for-help)
(define-key global-map "\M-s" 'save-buffer)
(setq default-tab-width 4)
(setq dired-listing-switches "-algot")
;some SUN keypad definitions
(global-set-key "*dr" 'beginning-of-line)
(global-set-key "*fr" 'end-of-line)
; extra keys for NeWS and sunview
;;(global-set-key "\M-[208z" 'search-forward)
;;(global-set-key "\M-[211z" 'search-backward)
;;(global-set-key "\M-[209z" 'research-forward)
;;(global-set-key "\M-[212z" 'research-backward)
;some VT220 keypad bindings
;(setq term-setup-hook 'my-vt220-keys)
;;(if (eq (string-match "vt[123]" (getenv "TERM")) 0)
;; (setq term-setup-hook 'my-vt220-keys)
;;)
(setq c-mode-hook
'(lambda ()
(local-set-key "
" 'newline-and-indent)
(local-set-key "OPB" 'compile)
(local-set-key "OPn" 'next-error)
(set-fill-column 77)
(auto-fill-mode 1)
)
)
(setq emacs-lisp-mode-hook
'(lambda ()
(local-set-key "
" 'newline-and-indent))
)
(setq fundamental-mode-hook
'(lambda ()
(local-set-key "
" 'newline-and-indent))
)
;;; set up shell mode
(setq shell-mode-hook '(lambda ()
; (local-set-key "\C-u" 'kill-shell-input-maybe)
; (local-set-key "\C-a" 'shell-beginning-of-line-maybe)
(local-set-key "^[\C-i" 'my-shell-completion-help)
(local-set-key "\C-c\C-i" 'my-shell-complete)
(local-set-key " " 'my-shell-complete))
)
(setq text-mode-hook
'(lambda ()
(set-fill-column 72)
(auto-fill-mode 1)
(setq paragraph-start (quote "^$\\|^ "))
(setq indent-line-function 'indent-relative-maybe)
(setq auto-fill-hook
'(lambda ()
(do-auto-fill)
)
)
(setq auto-fill-function
'(lambda ()
(do-auto-fill)
)
)
; (setq fill-prefix (get-fill-prefix))
; (setq paragraph-separate (quote "^[ .]\\|^@[a-zA-Z][^({[]"))
)
)
(defun shell-script-mode ()
"Major mode for editing shell scripts."
(interactive)
(text-mode)
(set-fill-column 132)
; (auto-fill-mode 1)
(setq mode-name "Shell Script")
(local-set-key "
" 'newline-and-indent)
(setq indent-line-function 'indent-relative-maybe)
)
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; - RMail mods
;(defun mail-read-aliases nil
; "Read the mail aliases database from ~/EMACSLOADPATH/mail-aliases.el"
; (interactive)
; (load "mail-aliases" nil t)
; ; The above file defines the association list: imail-aliases
; (setq mail-aliases nil) ; Disable the built-in alias mechanism
;)
;(mail-read-aliases)
;(setq mail-mode-hook
; '(lambda nil
; (define-key mail-mode-map "\C-c\C-a" 'mail-interactive-insert-alias)
; (set-fill-column 72)
; (auto-fill-mode 1)
; (setq tab-stop-list (list 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90))
;; (setq mail-mode-hook nil)
; )
;)
;
;(defun mail-interactive-insert-alias nil
; "Insert a mail alias."
; (interactive)
; (insert (or
; (cdr-safe (assoc
; (completing-read "Pick an alias: "
; imail-aliases nil t) imail-aliases))
; "")))
;; modify behaviour of send-mail-function
(setq send-mail-function (function (lambda ()
(interactive)
; (ding)
(if (y-or-n-p "Add .signature? ")
(mail-signature)
; (error ".signature not added.")
)
(if (y-or-n-p "Really send? ")
(sendmail-send-it)
(error "Send Aborted")
)
)
)
)
;;You could probably do it with:
;; modify behaviour of send-mail-function to add ~/.signature
;(setq send-mail-function (function (lambda ()
; (interactive)
; (mail-signature)
; (sendmail-send-it))))
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; recording outgoing mail:
(setq mail-archive-file-name "/usr/people/garym/Mail/rmail.out")
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; shell name completion
(defvar shell-word-regexp "\\s-"
"*Regexp delimiting words on shell command lines.")
(defun shell-mode-fns ()
"Add special shell mode functions."
(define-key shell-mode-map "\C-c." 'copy-last-shell-word)
(define-key shell-mode-map "\M-\t" 'complete-last-shell-word))
(defun copy-last-shell-word ()
"Copy the last word from the previous shell input and insert before point."
(interactive)
(let ((last-word-start (unwind-protect
(save-excursion
(goto-char last-input-end)
(backward-char 1)
(re-search-backward shell-word-regexp)
(forward-char 1)
(max last-input-start (point-marker))))))
(insert (buffer-substring last-input-end last-word-start))
(delete-char -1)))
(defun complete-last-shell-word ()
"Perform filename completion on the last word of the current line."
(interactive)
(let* ((end (point))
(beg (unwind-protect
(save-excursion
(re-search-backward shell-word-regexp)
(forward-char 1)
(max (marker-position (process-mark (get-buffer-process
(current-buffer))))
(point)))))
(pattern (buffer-substring beg end))
(file (file-name-nondirectory pattern))
(dir (cond ((file-name-directory pattern))
(default-directory)))
(completion (file-name-completion file dir)))
(cond ((eq completion t))
((null completion)
(message "No completions for \"%s\"" pattern)
(ding))
((not (string= file completion))
(delete-region beg end)
(insert (concat (file-name-directory pattern) completion)))
(t
(message "Making Completion list...")
(with-output-to-temp-buffer " *Completions*"
(display-completion-list
(file-name-all-completions file dir)))
(message "Making completion list...%s" "done")))))
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; set the status line to contain the current host
(setq short-hostname
(substring (system-name) 0 (string-match "\\." (system-name))))
(setq-default mode-line-format
'("--%1*%1*-" mode-line-buffer-identification " " global-mode-string
" %[("
mode-name minor-mode-alist "%n" mode-line-process
")%]----"
(-3 . "%p")
"----<"
short-hostname
">-%-")
)
(display-time)
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Restore previous environment (if any)
;;(load-library "em-config.el")
;;(emc-restore)
;; Follow the above with this code to enable saving of Emacs state
;; when quitting a session:
(defun save-buffers-kill-emacs (&optional arg)
"Offer to save each buffer, save file configuration, then kill this Emacs fork.
With prefix arg, silently save all file-visiting buffers, then kill."
(interactive "P")
(save-some-buffers arg t)
;; (emc-save)
(kill-emacs))
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; matching braces:
(defun match-paren (arg)
"Go to the matching parenthesis if on parenthesis otherwise insert %."
(interactive "p")
(cond
((looking-at "[([{]") (forward-sexp 1) (backward-char))
((looking-at "[])}]") (forward-char) (backward-sexp 1))
(t (self-insert-command (or arg 1)))))
(global-set-key "%" 'match-paren)
;;Just put the cursor on a { [ or ( and hit '%' and it'll jump to the
;;matching { [ or (.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; all set ... lets go emacs!
(server-start)
;;--
;;Gary Lawrence Murphy ---------------- garym@virtual.rose.utoronto.ca
;;279 Fifth Avenue/Ottawa Ontario/Canada K1S 2N4 ------ (613) 230-6255
;;The true destination is always just here, now ----------------------
From garym@virtual.rose.utoronto.ca Wed Jan 6 14:41:15 1993
Date: Wed, 6 Jan 1993 13:56:16 -0500
From: Gary Lawrence Murphy <garym@virtual.rose.utoronto.ca>
To: garym@ie.utoronto.ca
Subject: emacs.el
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; .Emacs.el -- source for an auto-recompiling .emacs.elc
;;
;; 1988 by Gary Murphy (garym@cognos.uucp)
;; 1992 by Gary Murphy (gary.murphy@software.mitel.com or murphyg)
;; 1993 by Gary Murphy (garym@virtual.rose.utoronto.ca)
;;
;; This is a cleaned-up edition of my personal emacs start-up file, pieced
;; together over many difference sites over many years; I won't even pretend
;; to understand what most of this stuff means and you are on your own if you
;; want to customize anything.
;;
;; To save time on starting emacs (addressing a key complaint from vi-users)
;; I have my start-up stored as a self-recompiling file; the first time you
;; compile the file, you will have the overhead of the byte-compiler in memory
;; but on subsequent runs, unless the .Emacs.el changes, emacs will start
;; more quickly and will load without the compiler (unless you byte-compile
;; something else)
;;
;; useful tip: if you use X-Windows, load xemacs with a '-font screen' option
;;
;; Installation:
;;
;; 1) copy this file to .Emacs.el in your root directory
;;
;; 2) copy any relevant .el files from my home ~/emacs directory*
;; in particular, you may want the following:
;;
;; mail-aliases.el code-stuff.el gnus-speedups.el gnus-wrap.el
;; mail-abbrevs.el shell-complete.el
;;
;; * I am lobbying to have most of this moved to the emacs/lisp/local
;; directory where it belongs.
;;
;; 3) make a home emacs directory and add the following line to your .cshrc file:
;;
;; setenv EMACSLOADPATH ~/emacs:/usr/tools/emacs/lisp/local:/usr/tools/emacs/lisp
;;
;; 4) edit this file with emacs, changing occurances of USER to your login name
;; this is most easily done with the M-% command
;;
;; 5) M-x eval-current-buffer
;;
;; 6) have fun
;;
;; -- the planning is with the many; the decision is done alone --
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; detect out of date start-up file and recompile.
;; note that this will keep the byte-compiler loaded for the duration
;; of the new session.
(defun Wait! ()
"If ~/.Emacs.el exists and is newer than ~/.emacs, recompile it to ~/.Emacs.elc and move the compiled version to ~/.emacs."
(cond
((file-newer-than-file-p "~/.Emacs.el" "~/.emacs")
(let ((mode-line-format "") (mode-line-inverse-video nil))
(message "please standby: recompiling .Emacs.el ...")
(sit-for 1)
(byte-compile-file "~/.Emacs.el")
(rename-file "~/.Emacs.elc" "~/.emacs" t))
(load "~/.emacs" t t t)
(message ".emacs recompiled")
(sit-for 2)
)))
(Wait!)
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; standard libraries to be included ...
;; ------------------------------------------------------------------------
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Rmail -
;; This sets your emacs environment to use the M-x rmail command
;;
(setq rmail-primary-inbox-list (list "/usr/mail/garym"
(expand-file-name "~/Mail/mbox")))
;; set-up for the rmailout.el
;;
;; the output list will automagically set the file name when you save messages
;; in RMAIL format, something I almost never do ;-)
(setq rmail-output-directory (expand-file-name "~/Mail"))
(setq rmail-output-files-alist
'(
("Subj.*ISS" "ISS")
("-.*begin" "../ppa.new")
("To:.*pp[ac]" "mu")
("To:.*nativenet" "nn")
))
(load-library "rmailout")
;; change the quoting char and reply only to sender
(defun new-rmail-reply (recipients-too)
"Reply to the sender of the current message.
Prefix argument means CC: all other recipients of original message."
(interactive "P")
(rmail-reply (not recipients-too))
(mail-yank-original 0)
(goto-char 1)
(re-search-forward mail-header-separator nil t)
(replace-regexp "^" ">"))
;;; set up the z key to reply to sender & include message
(setq rmail-mode-hook
'(lambda ()
(define-key rmail-mode-map "z" 'new-rmail-reply)))
;; minibuffer command history on C-n C-p
;; (load-library "site/minibuf-mem")
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; automagically loaded libraries:
;; ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
;; You may or may not have these available at your site. If you are interested
;; in something here and it doesn't seem to exist, you can take a copy from
;; /home/staff/murphyg/emacs (if I have it)
;; - comments and source files
(autoload 'code-comment-mode "code-stuff.el"
"Major mode for adding comments to source code." t)
(autoload 'code-mode "code-stuff.el"
"Major mode for editing source code." t)
;; - a shell for each directory
(autoload 'sh "sh" "Shell mode with buffer per directory" t)
;; - shell completion
(autoload 'my-shell-complete "shell-complete" "shell completion" t)
(autoload 'my-shell-completion-help
"shell-complete" "shell completion list" t)
;; - get around the mitel rmail preempting:
;; (autoload 'rmail "/usr/tools/emacs/lisp/rmail" nil t)
;; - get around a bug in the installation at virtual.rose:
(autoload 'rmail "/usr/local/emacs/lisp/rmail" nil t)
(autoload 'sendmail "/usr/local/emacs/lisp/sendmail" nil t)
;; - filename completion, even in shells or with envirnment vars
(autoload 'complete-filename "filename" nil t)
(setq shell-mode-hook
(function (lambda () (local-set-key "\^I" 'complete-filename))))
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; GNU Smalltalk system
(setq auto-mode-alist
(append '(("\\.st" . smalltalk-mode))
auto-mode-alist))
(autoload 'smalltalk-mode "/system/util/gnu/smalltalk-1.1/st.elc"
"GNU SmallTalk Version 1.1" t)
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; GNUS - emacs news reader
;;
;; I much prefer gnus over rn for handling my news. Admittedly it is
;; many times slower than rn, but if you get a copy of my speedup code
;; it is quite acceptable. You shouldn't be reading news anyway ;-)
(autoload 'gnus "gnus-wrap" "Network News." t)
(autoload 'gnus-post-news "gnuspost" "Posting Network News." t )
;;; set gnus up
(setq gnus-default-article-saver 'gnus-Subject-save-in-mail)
(setq gnus-default-distribution "na")
(setq gnus-interactive-post nil)
(setq gnus-auto-select-next "quietly")
(setq gnus-auto-center-subject nil)
;;; NOTE NOTE NOTE: the getenv "HOST" below gets an environment
;;; variable that is automagically set by the tcsh shell. If you use
;;; the csh shell, you can either change the (getenv "HOST") to
;;; "yourmachine" or you can add a line to your .login as follows:
;;; setenv HOST `hostname`
(setq gnus-nntp-server (getenv "HOST"))
(setq gnus-your-domain "Software.Mitel.COM")
;;; define your favorite description of your organization.
(setq gnus-your-organization "Applications Software II, MITEL Corporation, Kanata, Ontario, Canada")
(setq gnus-nntp-service nil)
(setq gnus-use-generic-from t)
(setq nnspool-active-file "/usr/spool/news/lib/active")
(setq nnspool-history-file "/usr/spool/news/lib/history")
;;; put your mail directory in here
(setq gnus-article-save-directory "~/Mail/")
(setq gnus-novice-user nil)
;;; hooks - got it from the net, don't remember what it does, but I
;;; remember wanting to use it.
(setq gnus-Article-mode-hook
'(lambda ()
(kill-local-variable 'global-mode-string)))
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; set-up unix and keybinding environment stuff
;;
;; because I like to use the backspace key, I bind help to M-x
;; rather than C-h
(setq lpr-command "print")
(setq lpr-switches (list "-2r"))
(setq tab-width 4)
(global-set-key "\b" 'delete-backward-char)
(global-set-key "\M-o" 'mark-paragraph)
(global-set-key "\M-h" 'help-for-help)
(define-key global-map "\M-s" 'save-buffer)
(setq default-tab-width 4)
(setq dired-listing-switches "-algot")
;some SUN keypad definitions
(global-set-key "*dr" 'beginning-of-line)
(global-set-key "*fr" 'end-of-line)
; extra keys for NeWS and sunview
;;(global-set-key "\M-[208z" 'search-forward)
;;(global-set-key "\M-[211z" 'search-backward)
;;(global-set-key "\M-[209z" 'research-forward)
;;(global-set-key "\M-[212z" 'research-backward)
;some VT220 keypad bindings
;(setq term-setup-hook 'my-vt220-keys)
;;(if (eq (string-match "vt[123]" (getenv "TERM")) 0)
;; (setq term-setup-hook 'my-vt220-keys)
;;)
(setq c-mode-hook
'(lambda ()
(local-set-key "
" 'newline-and-indent)
(local-set-key "OPB" 'compile)
(local-set-key "OPn" 'next-error)
(set-fill-column 77)
(auto-fill-mode 1)
)
)
(setq emacs-lisp-mode-hook
'(lambda ()
(local-set-key "
" 'newline-and-indent))
)
(setq fundamental-mode-hook
'(lambda ()
(local-set-key "
" 'newline-and-indent))
)
;;; set up shell mode
(setq shell-mode-hook '(lambda ()
; (local-set-key "\C-u" 'kill-shell-input-maybe)
; (local-set-key "\C-a" 'shell-beginning-of-line-maybe)
(local-set-key "^[\C-i" 'my-shell-completion-help)
(local-set-key "\C-c\C-i" 'my-shell-complete)
(local-set-key " " 'my-shell-complete))
)
(setq text-mode-hook
'(lambda ()
(set-fill-column 72)
(auto-fill-mode 1)
(setq paragraph-start (quote "^$\\|^ "))
(setq indent-line-function 'indent-relative-maybe)
(setq auto-fill-hook
'(lambda ()
(do-auto-fill)
)
)
(setq auto-fill-function
'(lambda ()
(do-auto-fill)
)
)
; (setq fill-prefix (get-fill-prefix))
; (setq paragraph-separate (quote "^[ .]\\|^@[a-zA-Z][^({[]"))
)
)
(defun shell-script-mode ()
"Major mode for editing shell scripts."
(interactive)
(text-mode)
(set-fill-column 132)
; (auto-fill-mode 1)
(setq mode-name "Shell Script")
(local-set-key "
" 'newline-and-indent)
(setq indent-line-function 'indent-relative-maybe)
)
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; - RMail mods
(defun mail-read-aliases nil
"Read the mail aliases database from ~/EMACSLOADPATH/mail-aliases.el"
(interactive)
(load "mail-aliases" nil t)
; The above file defines the association list: imail-aliases
(setq mail-aliases nil) ; Disable the built-in alias mechanism
)
(mail-read-aliases)
(setq mail-mode-hook
'(lambda nil
(define-key mail-mode-map "\C-c\C-a" 'mail-interactive-insert-alias)
(set-fill-column 72)
(auto-fill-mode 1)
(setq tab-stop-list (list 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90))
; (setq mail-mode-hook nil)
)
)
(defun mail-interactive-insert-alias nil
"Insert a mail alias."
(interactive)
(insert (or
(cdr-safe (assoc
(completing-read "Pick an alias: "
imail-aliases nil t) imail-aliases))
"")))
;; modify behaviour of send-mail-function
(setq send-mail-function (function (lambda ()
(interactive)
; (ding)
(if (y-or-n-p "Add .signature? ")
(mail-signature)
; (error ".signature not added.")
)
(if (y-or-n-p "Really send? ")
(sendmail-send-it)
(error "Send Aborted")
)
)
)
)
;;You could probably do it with:
;; modify behaviour of send-mail-function to add ~/.signature
;(setq send-mail-function (function (lambda ()
; (interactive)
; (mail-signature)
; (sendmail-send-it))))
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; recording outgoing mail:
(setq mail-archive-file-name "/home/garym/Mail/rmail.out")
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; shell name completion
(defvar shell-word-regexp "\\s-"
"*Regexp delimiting words on shell command lines.")
(defun shell-mode-fns ()
"Add special shell mode functions."
(define-key shell-mode-map "\C-c." 'copy-last-shell-word)
(define-key shell-mode-map "\M-\t" 'complete-last-shell-word))
(defun copy-last-shell-word ()
"Copy the last word from the previous shell input and insert before point."
(interactive)
(let ((last-word-start (unwind-protect
(save-excursion
(goto-char last-input-end)
(backward-char 1)
(re-search-backward shell-word-regexp)
(forward-char 1)
(max last-input-start (point-marker))))))
(insert (buffer-substring last-input-end last-word-start))
(delete-char -1)))
(defun complete-last-shell-word ()
"Perform filename completion on the last word of the current line."
(interactive)
(let* ((end (point))
(beg (unwind-protect
(save-excursion
(re-search-backward shell-word-regexp)
(forward-char 1)
(max (marker-position (process-mark (get-buffer-process
(current-buffer))))
(point)))))
(pattern (buffer-substring beg end))
(file (file-name-nondirectory pattern))
(dir (cond ((file-name-directory pattern))
(default-directory)))
(completion (file-name-completion file dir)))
(cond ((eq completion t))
((null completion)
(message "No completions for \"%s\"" pattern)
(ding))
((not (string= file completion))
(delete-region beg end)
(insert (concat (file-name-directory pattern) completion)))
(t
(message "Making Completion list...")
(with-output-to-temp-buffer " *Completions*"
(display-completion-list
(file-name-all-completions file dir)))
(message "Making completion list...%s" "done")))))
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; set the status line to contain the current host
(setq short-hostname
(substring (system-name) 0 (string-match "\\." (system-name))))
(setq-default mode-line-format
'("--%1*%1*-" mode-line-buffer-identification " " global-mode-string
" %[("
mode-name minor-mode-alist "%n" mode-line-process
")%]----"
(-3 . "%p")
"----<"
short-hostname
">-%-")
)
(display-time)
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Restore previous environment (if any)
;;(load-library "em-config.el")
;;(emc-restore)
;; Follow the above with this code to enable saving of Emacs state
;; when quitting a session:
(defun save-buffers-kill-emacs (&optional arg)
"Offer to save each buffer, save file configuration, then kill this Emacs fork.
With prefix arg, silently save all file-visiting buffers, then kill."
(interactive "P")
(save-some-buffers arg t)
;; (emc-save)
(kill-emacs))
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; matching braces:
(defun match-paren (arg)
"Go to the matching parenthesis if on parenthesis otherwise insert %."
(interactive "p")
(cond
((looking-at "[([{]") (forward-sexp 1) (backward-char))
((looking-at "[])}]") (forward-char) (backward-sexp 1))
(t (self-insert-command (or arg 1)))))
(global-set-key "%" 'match-paren)
;;Just put the cursor on a { [ or ( and hit '%' and it'll jump to the
;;matching { [ or (.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; all set ... lets go emacs!
(server-start)
;;--
;;Gary Lawrence Murphy ---------------- garym@virtual.rose.utoronto.ca
;;279 Fifth Avenue/Ottawa Ontario/Canada K1S 2N4 ------ (613) 230-6255
;;The true destination is always just here, now ----------------------
--
Gary Lawrence Murphy ---------------- garym@virtual.rose.utoronto.ca
University of Toronto, Industrial Eng Dept fax: (416) 971-1373
4 Taddle Creek Rd, Toronto, Ont M5S 1A4 voice: (416) 978-3776
The true destination is always just here, now ----------------------
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads