Article View: comp.lang.asm370
Article #385SAVE area offset zero
From: Rick Troth
Date: Tue, 21 Aug 1990 00:52
Date: Tue, 21 Aug 1990 00:52
11 lines
1047 bytes
1047 bytes
In the save area ... registers 14 thru 12 are placed at offset 12,
which means R14 goes to +12, R15 goes to +16, R0 goes to +20, R1 goes to +24,
and so on. Offset 4 points to the next SAVE area, right? And offset 8 to
the previous SAVE area, right?
So what does offset zero refer to? If you say "R13 goes there",
I won't shoot you. Pointing to itself would provide validity checking,
but is that what offset zero does? If not, then what?
Rick Troth <TROTH@RICEVM1.RICE.EDU> ------------- Rice ONCS VM Systems Support
Technical Details
Message-ID:
<9008210102.AA18329@ucbvax.Berkeley.EDU>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!sdd.hp.com!ucsd!ucbvax!RICEVM1.RICE.EDU!TROTHShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!sdd.hp.com!ucsd!ucbvax!RICEVM1.RICE.EDU!TROTH
From: TROTH@RICEVM1.RICE.EDU (Rick Troth)
Newsgroups: comp.lang.asm370
Subject: SAVE area offset zero
Message-ID: <9008210102.AA18329@ucbvax.Berkeley.EDU>
Date: 21 Aug 90 00:52:36 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Reply-To: IBM 370 Assembly Programming Discussion List
<ASM370@OHSTVMA.BITNET>
Distribution: inet
Organization: The Internet
Lines: 11