🚀 go-pugleaf

Invariably, registers 0, 1, 14, and 15 are available for use in an MVCL
instruction -- with no saving/restoring of previous contents.  In fact,
I rarely see Real Programmers using any other registers with an MVCL!

Practical rule-of-thumb:

    If the string being moved is known to *always* be 256 bytes or
    less, then go with an EXECUTE of a MOVE CHARACTERS instruction (but
    watch for a length of zero bytes!).  If the string being moved is
    of a constant length (i.e., known at assembly time) which is 4K or
    less, then a series of MOVE CHARACTERS instructions is usually
    "best" (*not* a loop:  a series of MVC instructions).  In all other
    cases (more than 4K, or an unknown length that may exceed 256), go
    with the MOVE LONG instruction.

Note that MOVE LONG cannot handle strings that are longer than 16 Megs
(the length fields are only the bottom 24 bits of the odd registers).
However, if you are dealing with objects whose sizes are measured in
megabytes, you probably shouldn't be moving them around, anyway...

      John Pershing
      IBM Research, Yorktown Heights