Thread View: comp.lang.forth.mac
5 messages
5 total messages
Started by Anthony E Bible
Mon, 14 Dec 1992 14:06
Survey
Author: Anthony E Bible
Date: Mon, 14 Dec 1992 14:06
Date: Mon, 14 Dec 1992 14:06
10 lines
555 bytes
555 bytes
Just to try to keep a little traffic going in this long dormant group: What version of FORTH are you using on the Mac? I have MacForth. Regards, tony
Re: Survey
Author: Jim Lynch
Date: Tue, 15 Dec 1992 03:19
Date: Tue, 15 Dec 1992 03:19
4 lines
591 bytes
591 bytes
I am using pocket forth for doing my pre calculus/matrix homework, it's v6.1. BTW, I used to implement forths... now, I'm highly interested in gnu cc for its portability and general spirit...
Re: Survey
Author: anderpe
Date: Tue, 15 Dec 1992 04:22
Date: Tue, 15 Dec 1992 04:22
27 lines
1526 bytes
1526 bytes
In article <Bz95uE.AB7@news.iastate.edu>, bible@iastate.edu (Anthony E Bible) writes: > > Just to try to keep a little traffic going in this long dormant group: > > What version of FORTH are you using on the Mac? > > > I have MacForth. > > > Regards, > tony -- Hi, i have just gained access to this thread. I have had a long but not involved association with Forth (IBM-PC and Commodore 64). Since becomming a MACophile I have not seen any information about versions of Forth for the MAC (commercial or public domain). Any information on available versions would be most welcome. +-----------------------------------------------------------------+ | Peter Anderson ANDERPE@HHCS.GOV.AU | | | | LAN Support Group | | Department of Health, Housing and Community Services | | | | Phone: 061 6 289 7820 Fax: 061 6 289 8140 | +-----------------------------------------------------------------+
Re: Survey
Author: Anthony E Bible
Date: Thu, 17 Dec 1992 15:06
Date: Thu, 17 Dec 1992 15:06
90 lines
3957 bytes
3957 bytes
In article <1992Dec15.152241.549@hhcs.gov.au> anderpe@hhcs.gov.au writes:
>--
>Hi, i have just gained access to this thread. I have had a long but not
>involved association with Forth (IBM-PC and Commodore 64). Since becomming a
>MACophile I have not seen any information about versions of Forth for the MAC
>(commercial or public domain). Any information on available versions would be
>most welcome.
>
Peter:
There is a FAQ for the comp.lang.forth group which gets posted
regularly. One of the questions concerns Forth for the Mac. I have excerpted
it for you:
==============================================================================
,Q10: Where can I find a Forth for the MAC?
ANSWER:
From: CHERGR@lure.latrobe.edu.au
Newsgroups: comp.lang.forth
Subject: Forth system for MacClassic
Message-ID: <5163@lure.latrobe.edu.au>
Date: 18 Mar 91 17:14:29 GMT
Organization: VAX Cluster, Computer Centre, La Trobe University
Lines: 24
I can recommend Mach2 Forth for the Macintosh.
Its strong points are:
1. inexpensive.
2. stable.
3. compiles to machine code so its quick.
4. straightforward access to the Mac toolbox.
5. menu selected templates mean windows and
menus etc. are easy to make for the beginner.
6. standard syntax machine code assembler.
7. the novice programmer does not have to worry
about implementing the Mac event loop.
Weak points are:
1. a rudimentary built in text editor.
2. the Mac event loop is handled by an IO task running
under the multitasker. This makes extensions to
the event loop conceptually difficult.
3. development has ceased but it will be
supported for later Mac System releases.
This is available mail order from:
MacTutor,1250 N. Lakeview, Suite O, Anaheim, California 92807
call (714) 777 1255 for credit cards
price $90.00
Message-Id: <9104192113.AA03564@mitch.Eng.Sun.COM>
To: dwp@willett.pgh.pa.us, ddi1!lrark!gars@uunet.uu.net
Subject: Re: Answers to Frequently Asked Questions (version 1.2)
Date: 19 Apr 91 14:13:49 PDT (Fri)
From: pitt!Eng.Sun.COM!Mitch.Bradley
Forthmacs by Bradley Forthware is also available for the Macintosh.
This is the same Forth that is the basis of Sun's Open Boot firmware.
Macintosh Forthmacs costs $50 for working disk+manual, and $50 extra for
source code.
Forthmacs is available for the following machines:
Atari ST, Macintosh (I and II), OS-9, Sun (680x0 and SPARC), NeXT.
Mitch Bradley, wmb@Eng.Sun.COM
There are several PD/Shareware MAC Forth's available on the various
BBoard systems and on GEnie. See the 'Forth On-line
Resource/Technical Help Letter' post for how to access those services.
==============================================================================
The only other two Forth's for the Mac I am aware of are:
pocketForth -- I think this is a shareware version of Forth. Other posters to
this group are using it; perhaps they can suggest archives
where you could obtain it.
MacForth -- A full featured Forth for the Macintosh from Creative Solutions
which has been recommended by some people in the past. This is
the one I use, and I like it a lot, but it is fairly expensive
( >> $100; I don't remember the exact price) if you are just
tinkering. If you want more details write me at:
bible@iastate.edu
Regards,
tony
Re: Survey
Author: Ray Ingles
Date: Thu, 17 Dec 1992 19:55
Date: Thu, 17 Dec 1992 19:55
39 lines
1960 bytes
1960 bytes
In article <BzEsnn.B7J@news.iastate.edu> bible@iastate.edu (Anthony E Bible) writes:
>In article <1992Dec15.152241.549@hhcs.gov.au> anderpe@hhcs.gov.au writes:
>==============================================================================
>
> The only other two Forth's for the Mac I am aware of are:
>
>pocketForth -- I think this is a shareware version of Forth. Other posters to
> this group are using it; perhaps they can suggest archives
> where you could obtain it.
Actually, PocketForth is *free*ware...
PocketForth is available right here at Michigan. The anonymous ftp
address I know about is:
archive.umich.edu (141.211.165.41) (also called mac.archive.umich.edu)
Here is the signon message:
530-Due to overwhelming usage during business hours, restrictions to ftp access
530-are now being enforced. PLEASE be considerate and ftp during non-"business
530-hours" as much as possible. Also, please keep connection times short.
530-
530-Weekends: 60 connections
530-Weekdays from 11pm 'til 4am: 60 connections
530-Weekdays from 6pm 'til 11pm, and 4am 'til 6am: 30 connections
530-Weekdays from 6am 'til 6pm ("business hours"): 10 connections
530-
530-(All times are in EST.)
530-
530- Thank you for your cooperation and understanding.
Hope this helps...
Ray Ingles
ingles@engin.umich.edu
"The meek can *have* the Earth. The rest of us are going to the stars!"
- Robert A. Heinlein
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads