🚀 go-pugleaf

 MAM> I'm trying to link JPI Modula-2 to an object file which was written with
 MAM> Microsoft C.  I don't have the source to the object file, or anything
 MAM> useful except the names of the procedures included.  I've tried wading
 MAM> throught the JPI documentation to try to find which pragmas I need in
 MAM> order to make the link work, but I haven't quite been able to do it.  I
 MAM> was hoping someone out on the nets would be able to help me out.

The following is from a definition  module that interfaces to a MSC library in the large model.

(*# module(implementation=>off, init_code=>off)                               *)

DEFINITION MODULE MW;


(*# data(near_ptr => off),
    call(o_a_copy => off, o_a_size => off, c_conv => on, near_call => off,
    reg_saved => (si, di, ds, st1, st2), reg_param => ()),
    name(prefix => c)
  *)

Hope this helps. 
I'm not really that much of an expert at those pragmas. 
One other thing that could cause problems is  the TopSpeed linker may not like some things in msc obj's, but at least Sean Wilson at the Clarion US office has ways to fix most possible problems. Clarion US
303-785-4556 support
303-946-1650 fax

On an unrelated matter the PMI BBS number has been changed. PMI 
box 8402 
Green Bay WI 54308
414-468-6040 voice
414-465-0464 fax
414-465-1656 bbs


--  
uucp: uunet!m2xenix!puddle!139!590!John.Mcmonagle
Internet: John.Mcmonagle@f590.n139.z1.fidonet.org