Re: laser printers and heavy paper

Article View: comp.lang.postscript

Article #2855

Back to comp.lang.postscript Previous Next

#2855

From: Carlo Tiana
Date: Wed, 22 Aug 1990 01:12

14 lines
1299 bytes

I have managed to get card stock through "fairly" reliably (say, 90%
success) by feeding the card through the manual feed rails and pushing ever
so lightly on the trailing edge of the card, in such a way as to 'help' the
traction mechanism grab the card. If you do this, ad your card is long
enough to get to the fuser section of the printer, most of the time it
comes out printed, without jamming. Of course, open the 'straight paper
path' door, so the card does not have to go through the tortuous path it
usually follows!
As I say, this sort of works (from personal experience! :), but it can be
quite frustrating if you have to feed a lot of cards (I fed about 200 and
200 envelopes this way... ouch!).
Carlo

carlo@cvs.rochester.edu

Technical Details

Message-ID: <9025@ur-cc.UUCP>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!ub!uhura.cc.rochester.edu!eagle.cvs.rochester.edu!carlo

References: <245@heaven.woodside.ca.us> <685@vidiot.UUCP>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!ub!uhura.cc.rochester.edu!eagle.cvs.rochester.edu!carlo
From: carlo@eagle.cvs.rochester.edu (Carlo Tiana)
Newsgroups: comp.lang.postscript
Subject: Re: laser printers and heavy paper
Message-ID: <9025@ur-cc.UUCP>
Date: 22 Aug 90 01:12:23 GMT
References: <245@heaven.woodside.ca.us> <685@vidiot.UUCP>
Sender: news@uhura.cc.rochester.edu
Reply-To: carlo@cvs.rochester.edu (Carlo Tiana)
Organization: Univ. Roch. Center for Visual Sci.
Lines: 14

Reply to Parent Message