Re: Help Zapping a LaserWriter

Article View: comp.lang.postscript

Article #2999

Back to comp.lang.postscript Previous Next

#2999

From: Kenneth Porter
Date: Tue, 04 Sep 1990 07:12

17 lines
1283 bytes


I've had trouble with my LC890 hanging and requiring a power
cycle to reset.  It is normally controlled from a Sun under a
lpd and some filters of my own design.  I send a ^D after every
job, as well as sending stuff before the job to put the host
and filename in the printer's LCD display.
 
I just started seeing this hanging phenomenon after some months
of operation.  If I connect the printer to a PC running a
terminal emulator after it gets into this state, I can do a ^T
and see %%[status: idle]%%, but typing normal commands gets no
response, even an error message.  Since it doesn't happen
frequently, and the last time it happened, I needed some
printout immediately, I just power-cycled it.  Next time, I'll
try ^C and ^Q, but I think I did try this with no effect, as
they're obvious things to try.

Technical Details

Message-ID: <20118@well.sf.ca.us>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!zaphod.mps.ohio-state.edu!mips!pacbell.com!pacbell!well!shiva

References: <90239.115514SMITHM@QUCDN.BITNET> <547@wjh12.harvard.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!zaphod.mps.ohio-state.edu!mips!pacbell.com!pacbell!well!shiva
From: shiva@well.sf.ca.us (Kenneth Porter)
Newsgroups: comp.lang.postscript
Subject: Re: Help Zapping a LaserWriter
Summary: Similar experience with hanging NEC LC890
Message-ID: <20118@well.sf.ca.us>
Date: 4 Sep 90 07:12:03 GMT
References: <90239.115514SMITHM@QUCDN.BITNET> <547@wjh12.harvard.edu>
Lines: 17

Reply to Parent Message