🚀 go-pugleaf

In article <1795@treyvan.UUCP> dtb@adpgate.UUCP (Tom Beach) writes:
> Hi,
> 
> I'm having a problem with downloaded fonts to my TI Microlaser PS35
> 
> I'm running Adobe Type Manager with Windows 3.1 and the Micrographx 
> postscript driver. Whenever I use the type 1 fonts supplied with ATM
> and Micrographx Designer, the printer defaults to courier unless I 
> first download the font explicitly. Taking the postscript file produced
> by the printer driver to another system and sending it to a HP Laserjet III
> with a postscript cartridge works as expected. TrueType fonts work as
> expected. It's just type 1 fonts, and it's just the TI Microlaser.
> 
> I can work around it by explicitly downloading the fonts so it's not
> a major problem. It is annoying and I'd prefer to fix it :-)
> 
> Any good ideas, or explnations, or ......
> 
> You may follow-up to comp.lang.postscript or email to me at:
> 
> 	dtb@adpgate.UUCP
> 
> Tom

Hey Tom,

I don't know much about Micrographx and TrueType but I think the problem might  
be similar to other postscript printers (like the QMS I'm using).
As I suggest, ATM manages TrueType-fonts and 'downloads' them to the printer  
automatically but not Type-1-fonts. This has to be done by Windows itself.
Which version of ATM do you use? If you use the old one (ATM 1.0 - I think) you  
have to edit the win.ini as follows:

At the printer device (i.e.: [PostScript, COM2] as I use it) the number of  
softfonts is shown and followed by lines to localize the softfonts. It looks  
like this:

[PostScript, COM2]
ATM=placeholder
softfonts=55
softfont1=d:\psfonts\pfm\gn______.pfm
softfont2=d:\psfonts\pfm\gnb_____.pfm
... and so on up to softfont 55 ...

If you add at these lines the localisation of your *.pfb-files these files  
(which are the outline-descriptions of the font) will be downloaded to your  
printer at the moment they were needed (and after using they will be  
immediately cleared from the printer). The new lines to do this have to look  
like this:

[PostScript, COM2]
ATM=placeholder
softfonts=55
softfont1=d:\psfonts\pfm\gn______.pfm,d:\psfonts\gn______.pfb
softfont2=d:\psfonts\pfm\gnb_____.pfm,d:\psfonts\gnb_____.pfb
... and so on up to softfont 55 ...

(Take care not to use my localisation of the files. Take your own paths!)

The new ATM (version 2.02 - it's part of the new AdobeIllustrator) edits the  
win.ini in this way automatically. But as I know ATM 2.02 does it only while  
installing new fonts. If you have a lot of fonts it might be easier to  
reinstall all your fonts with ATM 2.02. It's a hard work to do this by hand.  
I've done it serveral times ...

The explanation why the fonts work properly using a postscript-printfile is  
quite easy: If you produce the printfile (*.prn) the outline-description of the  
used fonts will be part of the *.prn (thats why *.prn's are much greater than   
the originals. If this *.prn is sent to the printer (downloaded) the printer  
gets the informations about the fonts from this file - and needs not to print  
Courier.

I hope this would help you!
-Borris-
-- 

---
Borris Balzer - Kennedyallee 34 - D-6000 Frankfurt am Main - Germany
Tel +49-69-639266 - Fax +49-69-6312324 - e-mail borris@boba.rhein-main.de