🚀 go-pugleaf

In article <92Dec14.234635.14905@acs.ucalgary.ca> I wrote:
>As the subject indicates, I am having a problem with our QMS-PS 800II laser
>printer.
>
>The problem that we are having is that it is taking an excessively long time
>to print some file on the printer. Some files print OK but others can take
>several HOURS to print. (The same files usually print within minutes on other
>laser printers that we have.)
>
>I believe that this problem is due to something that someone downloaded to the
>printer. What I would like to do is reset the printer to some default state
>(preferably as shipped from the factory). However, this printer does not have
>a "resettodefaults" command as the newer QMS printers have.
>
>If anyone can offer me any help with this problem, I would greatly appreciate
>it.
>
>Please send any replies directly to me and I will summarize any responses that
>I get.
>

It turned out that this was not the problem at all. Our setup is the printer
is connected to a Sun via a serial line. We discovered that it was necessary
to connect pin 8 (Data Carrier Detect) in order to get the printer to work
properly. After doing this, we have found no problems with the printer.

I received the following 2 replies to my request. Thanks to both of you for your
responses.


Steven Leikeim                        |
University of Calgary                 |   There are lies, damned lies,
Department of Electrical Engineering  |        and statistics.
Internet: steven@enel.ucalgary.ca     |

------------------------------------------------------------------------

Subject: Re: Problems with QMS-PS 800II
From: glenn durden <alfa@csource.oz.au>
Date: Thu, 17 Dec 92 13:35:43 +1100
Organization: Unique Computing Pty Ltd, Melbourne, Australia



If it is the board I am thinking of - 1986ish technology here, then the only
chip which stores information after the printer is powered off is the
"Zero Power Ram" chip - marked MK48Z02B-20 (U33 on the board).

I guess either replace this with a nice new fresh one, or find a friend with
an eprom burner or similar who can flush it for you.

cheers..

glenn durden
alfa@csource.oz.au  Unique Computing Pty Ltd, Melbourne, Australia
The opinions expressed above are that of the author only.

--------------------------------------------------------------------------
Date: Fri, 18 Dec 92 12:10:24 +0100
From: Borris Balzer <borris@boba.rhein-main.de>
Subject: Re: Problems with QMS-PS 800II


... at what kind of computer: DOS, Mac, NeXT, ...?
If you use a DOS machine I've a hint: At every font disk you buy from Linotype  
(and I suggest from Adobe too) there is a program 'psdown.exe' (for  
serial-connected printers) or 'pcsend.exe' (for parallel-connected printers)  
included. This program contains a option 'restart printer'. A panel informs:  
'This option clears the printer of any fonts you may have downloaded. ...' So  
it might clear the rest, too!?
If the program isn't available to you feel free to mail - I'll try to send it  
at your site.
-Borris-

---
Borris Balzer - Kennedyallee 34 - D-6000 Frankfurt am Main - Germany
Tel +49-69-639266 - Fax +49-69-6312324 - e-mail borris@boba.rhein-main.de
---
-- 
Steven Leikeim                        |
University of Calgary                 |   There are lies, damned lies,
Department of Electrical Engineering  |        and statistics.
Internet: steven@enel.ucalgary.ca     |