🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.lsi.cad
Article #880

Re: CIF plot on HP plotters?

#880
From: Marco Zelada
Date: Sat, 22 Apr 1989 23:02
22 lines
1663 bytes
In article <1973@quanta.eng.ohio-state.edu> kaul@icarus.eng.ohio-state.edu (Rich Kaul) writes:
>Does anyone have a good utility for printing a CIF or magic file on an
>HP7475 plotter?  I have the drivers for getting plot(5) format out on
>this plotter, but I can't find anything that does a good CIF plot for
>this beast.  This is for a Sun3 running SunOS 4.0.1, if that matters.
>

	I have been using penplot to do just such thing. Penplot takes a
CIF input and generates HPGL which goes to the plotter. I think that most of the
HP plotters use HPGL as thier interface and thus penplot sould do what you want.
There may be a need for minor mods if any to make it run on a diff HP plotter
model.  I have used it on the HP7580 and HP7550 with no problems.

	Get in touch with me if you want more info on this.
-- 
________________________________________________________________________________

Name:	Marco Zelada			Phone:	617 353 9882, Fax: 353 6322
	VLSI CAD Engineer 		E-mail:	marco@buengc.bu.edu	
Dept:	Electrical & Computer Eng.	Mail:	44 Cummington St. Room 236
Org:	Boston University		 	Boston MA, 02215
________________________________________________________________________________
Technical Details
Message-ID: <2633@buengc.BU.EDU>
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!bloom-beacon!bu-cs!buengc!marco
References: <1973@quanta.eng.ohio-state.edu>

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!bloom-beacon!bu-cs!buengc!marco
From: marco@buengc.BU.EDU (Marco Zelada)
Newsgroups: comp.lsi.cad
Subject: Re: CIF plot on HP plotters?
Message-ID: <2633@buengc.BU.EDU>
Date: 22 Apr 89 23:02:42 GMT
References: <1973@quanta.eng.ohio-state.edu>
Reply-To: marco@buengc.bu.edu (Marco Zelada)
Followup-To: comp.lsi.cad
Organization: Boston Univ. Col. of Eng.
Lines: 22