Re: Workstation Info Wanted

Article View: comp.lsi.cad

Article #918

#918

From: Scott Evans
Date: Fri, 23 Feb 1990 07:48

14 lines
1098 bytes

In article <27218@cup.portal.com>, Chuck_SirVAX_Staatse@cup.portal.com writes:
> We are looking at VALID, MENTOR and Viewlogic for ASIC developement stations.
> After going thru demo and benchmarking phases we are ready for some "real" user
> inputs. If you've used any of these system for ASIC designs and have time to
> talk for a few minutes, please e-mail how I can best contact you. If you
> include your phone number I'll call you.
>  

What about Cadence, SCS, VTI, LSI Logic, et. al.  Although they aren't in the 
hardware (workstations) business, if you are doing ASIC's you should probably
look at what they have available.

Scott Evans
evans@ccicpg

Technical Details

Message-ID: <59880@ccicpg.UUCP>

Path:

arc1-ca.pugleaf.net!utzoo!attcan!uunet!aplcen!uakari.primate.wisc.edu!zaphod.mps.ohio-state.edu!usc!cs.utexas.edu!rutgers!rochester!rit!cci632!ccicpg!evans

References: <27218@cup.portal.com>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!aplcen!uakari.primate.wisc.edu!zaphod.mps.ohio-state.edu!usc!cs.utexas.edu!rutgers!rochester!rit!cci632!ccicpg!evans
From: evans@ccicpg.UUCP ( Scott Evans)
Newsgroups: comp.lsi.cad
Subject: Re: Workstation Info Wanted
Message-ID: <59880@ccicpg.UUCP>
Date: 23 Feb 90 07:48:21 GMT
References: <27218@cup.portal.com>
Organization: ICL North America (Business Systems), Irvine, CA.
Lines: 14

Reply to Parent Message