Article View: comp.lsi
Article #516SPICE parameters for low-voltage process
From: George Engel
Date: Fri, 22 Feb 1991 01:48
Date: Fri, 22 Feb 1991 01:48
17 lines
1389 bytes
1389 bytes
Over the past few years we have been developing several low-power, low-voltage digital signal processors. To date we have fabricated our designs through MOSIS. In keeping with our requirements for low-power/voltage, we would would like to operate the circuits from a supply voltage of 1.2 volts. Obviously, this will require fabricating the circuits in a "low-voltage" process with nominal threshold voltages for both the n- and p- type devices in the neighborhood of 0.5 volts. We were looking for foundries offering a suitable process for low-voltage digital logic. We are especially interested in obtaining at this time SPICE parameters for such a process so that we can evaluate the performance of our present circuits if they were to be fabricated in a low-voltage CMOS process. George L. Engel Washington University in Saint Louis Audio Signal Processing Laboratory gle@earth.wustl.edu
Technical Details
Message-ID:
<1991Feb22.014857.7464@cec1.wustl.edu>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!cec2!newsShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!cec2!news From: gle@earth.wustl.edu (George Engel) Newsgroups: comp.lsi Subject: SPICE parameters for low-voltage process Keywords: SPICE parameters, low-voltage process Message-ID: <1991Feb22.014857.7464@cec1.wustl.edu> Date: 22 Feb 91 01:48:57 GMT Sender: news@cec1.wustl.edu (USENET News System) Distribution: na Organization: Washington University, St. Louis MO Lines: 17