🚀 go-pugleaf

In article <8702052032.AA08704@mimsy.umd.edu> smb@MIMSY.UMD.EDU (Steve
M. Burinsky) writes:
>I tried to run Magic on a 110, but it always came up in black and white mode.
>I was working on a demo system running Sun 3.2.  I traced the problem to
>the way Magic determines what type of display it is running on.  On Suns,
>Magic does a FBIOGTYPE ioctl on /dev/fb which returns the frame buffer
>type (amoung other things).  The 110 *should* return FBTYPE_SUN4COLOR,
>but instead returns FBTYPE_SUN2BW.  Apparently, the system doesn't know
>about the on-board frame buffer (/dev/cgfour0).  I checked the EEPROM settings
>for the frame buffer default, but to no avail.

Wrong, ioctl breath!  In order to allow pre-3.2 programs to run on the 110
(albeit in monochrome mode), the cg4 frame buffer emulates a bw2.

The easiest way for a pixrect program to determine if it's running on a
color frame buffer is to do a pr_open() and look at the depth of the
returned pixrect.  (If you want to get fancy you can use
pr_available_plane_groups()).

If you can't modify Magic, here's a program which will lock the frame
buffer in its native (FBTYPE_SUN4COLOR) mode:

/*
 * cg4lock -- locks cg4 in native mode
 */

#include <stdio.h>
#include <sys/file.h>
#include <sys/types.h>
#include <sys/ioctl.h>
#include <sun/fbio.h>

#define	error(args)	{ printf args ; exit(1); }

main(argc, argv)
int argc;
char *argv[];
{
	char *dev;
	int fd;
	struct fbgattr attr;

	dev = argc > 1 ? argv[1] : "/dev/fb";

	/* open frame buffer */
	if ((fd = open(dev, O_RDWR)) < 0)
		error(("%s: open failed for %s\n", argv[0], dev));

	/* 
	 * get attributes, make sure it's a cg4 and not
	 * owned by another process 
	 */
	if (ioctl(fd, FBIOGATTR, &attr) == -1) 
		error(("%s: get attributes failed for %s\n",
			argv[0], dev));

	if (attr.real_type != FBTYPE_SUN4COLOR)
		error(("%s: device %s is not a cg4\n", argv[0], dev));

	if (attr.owner != 0)
		error(("%s: device %s is owned by process %d\n",
			argv[0], dev, attr.owner));

	/* set emulation type to cg4 */
	attr.sattr.flags = 0;
	attr.sattr.emu_type = FBTYPE_SUN4COLOR;

	if (ioctl(fd, FBIOSATTR, &attr.sattr) < 0) 
		error(("%s: set attributes failed for %s\n", 
			argv[0], dev));

	while (1)
		sleep(30000);
}

Run it in the background, then start your pixrect program.

For more information on the cg4, emulation mode, etc. refer to the
SunOS 3.2 release manual.

Disclaimer: No one else at Sun understands this, so how could they be
responsible for it?
-- 
David DiGiacomo  {decvax, ihnp4, ucbvax}!sun!david  david@sun.arpa
Sun Microsystems, Mt. View, CA  (415) 691-7495
David DiGiacomo  {decvax, ihnp4, ucbvax}!sun!david  david@sun.arpa
Sun Microsystems, Mt. View, CA  (415) 691-7495