Wanted: info on porting Berkeley VLSI CAD to Encore & Sequent

Article View: comp.lsi

Article #831

#831

From: kelem
Date: Fri, 19 Jun 1987 17:27

11 lines
1151 bytes

I would like to get information from everyone who has ported the Berkeley
VLSI CAD tools to Encore's or Sequent's.  I need to find out:
1.  How difficult/easy it was to port the tools?  Are there any peculiarities
    to their port of BSD 4.3?  How many of the tools worked?  How many didn't?
2.  Did you run Magic?  What graphics device(s) did you use?
3.  How well did the tools run on this system?
4.  Have you done anything to take advantage of the available parallelism?
    Do you plan to?
5.  What hardware configuration did you get?

Thanks

Technical Details

Message-ID: <378@aero2.ARPA>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watmath!clyde!rutgers!mit-eddie!oberon!sdcrdcf!trwrb!aero!aero2!kelem

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watmath!clyde!rutgers!mit-eddie!oberon!sdcrdcf!trwrb!aero!aero2!kelem
From: kelem@aero2.UUCP
Newsgroups: comp.lsi
Subject: Wanted: info on porting Berkeley VLSI CAD to Encore & Sequent
Message-ID: <378@aero2.ARPA>
Date: Fri, 19-Jun-87 13:27:55 EDT
Article-I.D.: aero2.378
Posted: Fri Jun 19 13:27:55 1987
Date-Received: Sun, 21-Jun-87 03:21:08 EDT
Reply-To: kelem@aero2.UUCP (Steve Kelem)
Organization: The Aerospace Corporation, El Segundo, CA
Lines: 11
Keywords: Berkeley Tools, Encore, Sequent