Re: Spice Parameters

Article View: comp.lsi

Article #878

#878

From: James J. Clark
Date: Sat, 05 Sep 1987 23:24

21 lines
1456 bytes

Spice model parameters are provided by MOSIS whenever they
send back a batch of fabricated integrated circuits to the
designers. (note: MOSIS is DARPA sponsored service which
interfaces between designers of integrated circuits and
various fabrication facilities) They do tests on the wafers
that the chips were located on to get the parameter values.
 One should be warned, however, that sometimes these
measurements are not too accurate and may even be way off
(this happened to me once). So one should look at the
parameter values closely - if they look reasonable then they
should be alright to use. 

If you want these typical spice parameters you may want to
e-mail a request to MOSIS (at mosis@isi.b.edu) or you can
e-mail myself and I will send you a few sets.

James J. Clark
Division of Applied Sciences
Harvard University

clark@seraphim.harvard.edu s beaarnMessaMessaMce irives w

Technical Details

Message-ID: <2804@husc6.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!seraphim!clark

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!seraphim!clark
From: clark@seraphim.harvard.edu (James J. Clark)
Newsgroups: comp.lsi
Subject: Re: Spice Parameters
Message-ID: <2804@husc6.UUCP>
Date: Sat, 5-Sep-87 19:24:27 EDT
Article-I.D.: husc6.2804
Posted: Sat Sep  5 19:24:27 1987
Date-Received: Sun, 6-Sep-87 08:17:47 EDT
Sender: news@husc6.UUCP
Reply-To: clark@seraphim.harvard.edu (James J. Clark)
Lines: 22
Keywords: spice model parameters
Summary: Spice parameter lists from MOSIS