Mac & ISDN

Thread View: comp.mac.misc

3 messages

[T] Back to Threads [V] Tree View [G] Group Articles

3 total messages Started by jack Sun, 16 Mar 1997 00:00

Author: jack
Date: Sun, 16 Mar 1997 00:00

27 lines
2017 bytes


If anyone has any Mac/ISDN experience please send me an email.

SITUATION:
I have a Motorola Bitsurfer and am having trouble bonding the B2 channel
using PPP protocols to my ISP. I've uve OT PPP, FreePPP with no luck. Any
help would be greatly appreciated.



===============================================================
Jack
Studio j
Internet Services Extraordinaire
ceo@studioj.com
http://www.studioj.com
913.780.4181 Voice (US)
913.324.8003 Fax/ISDN Dial-In

DO NOT SEND JUNK E-MAIL:
"By US Code Title 47, Sec.227(a)(2)(B), a computer/modem/printer meets
the definition of a telephone fax machine.  By Sec.227(b)(1)(C), it is
unlawful to send any unsolicited advertisement to such equipment.  By
Sec.227(b)(3)(C), a violation of the aforementioned Section is
punishable by action to recover actual monetary loss, or $500, whichever
is greater, for each violation."

Re: Mac & ISDN

Author: Mac Support Frontier
Date: Mon, 17 Mar 1997 00:00

25 lines
2230 bytes

In article <jhammes-ya02408000R1603971535560001@news.sound.net>,
jhammes@studioj.com (jack) wrote:

> If anyone has any Mac/ISDN experience please send me an email.
> 
> SITUATION:
> I have a Motorola Bitsurfer and am having trouble bonding the B2 channel
> using PPP protocols to my ISP. I've uve OT PPP, FreePPP with no luck. Any
> help would be greatly appreciated.

I use a single channel ISDN 8510T right now on my Mac, but I have used the
Bitsurfer with dual channel.  There is an init string which is required,
no matter which dialer you use.  I use FreePPP without problem.  Try:
   AT&F&C1&D2%A2=3@B0=2^M
         or
   AT&F&C1&D2%A2=95%A4=0@B0=2

I think it's the first one, but for some reason I have two written down
here and can't recall which one it is.  I know it is one of them.  If
neither works, let me know and I can restore some info on my Quadra here
at work to get the setting.  Let me know...   Good luck.
   Jim @ Frontier Tech Support
   If PCs are for beginners, Macs should require a driver's license.

Re: Mac & ISDN

Author: -
Date: Fri, 21 Mar 1997 00:00

32 lines
2609 bytes

In article <tech65-1603972208450001@ascend2-112.isdn.roc.frontiernet.net>,
tech65@frontiernet.net (Mac Support @ Frontier) wrote:

>In article <jhammes-ya02408000R1603971535560001@news.sound.net>,
>jhammes@studioj.com (jack) wrote:
>
>> If anyone has any Mac/ISDN experience please send me an email.
>> 
>> SITUATION:
>> I have a Motorola Bitsurfer and am having trouble bonding the B2 channel
>> using PPP protocols to my ISP. I've uve OT PPP, FreePPP with no luck. Any
>> help would be greatly appreciated.
>
>
>I use a single channel ISDN 8510T right now on my Mac, but I have used the
>Bitsurfer with dual channel.  There is an init string which is required,
>no matter which dialer you use.  I use FreePPP without problem.  Try:
>   AT&F&C1&D2%A2=3@B0=2^M
>         or
>   AT&F&C1&D2%A2=95%A4=0@B0=2
>
>I think it's the first one, but for some reason I have two written down
>here and can't recall which one it is.  I know it is one of them.  If
>neither works, let me know and I can restore some info on my Quadra here
>at work to get the setting.  Let me know...   Good luck.
>   Jim @ Frontier Tech Support
>   If PCs are for beginners, Macs should require a driver's license.

Does your ISP allow bonded channels: ie does it work 128 or 64K Demon for
example only works at 64K and deny that it is possible to bond two channels
together off one IP number. Is this your problem?

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads