🚀 go-pugleaf

In article <29830@ursa.bear.com>, chu@pit.bear.com (Arnold Chu) wrote:
> SCSI devices are designed to be daisy chained on a SINGLE SCSI controller
> within your PC.  Since the PAS-16 seem to have the SCSI controller built in,
> you have to remove the Adaptec controller card and daisy chain the Quantum
> drive to the PAS-16 controller card.  If the NEC-84 has a second SCSI socket,
> you should be able to plug the drive cable from the Quantum drive to the CDROM
> If there is no extra SCSI connector on either the Quantum or NEC-84, you need
> special SCSI cable with multiple connectors.

Well, not really.  There's no reason you cannot have more than one
SCSI adapter in a PC.  The PAS-16 driver may (or may not) support the
Quantum drive so the original poster might just have to keep both
cards.  Sounds to me more like the Adaptec and PAS-16 are interfering
with each other by using the same address or interrupt.  These should
be adjustable via jumper so that each card uses it's own address (I/O
or memory) and interrupt number.

.                                         -- Dave --
-- 
***************************************************************************
DaveJ Lyons       DoD #0633      dlyons@necis.ma.nec.com  (603)878-2567 BBS
Opinions expressed are mine. My company doesn't even know I'm here (Shhhh!)
***************************************************************************