Re: Sound Blaster Pro "?"

Article View: comp.multimedia

Article #1629

#1629

From: Robert Fries
Date: Sat, 09 Jan 1993 00:47

20 lines
1213 bytes

In article <C0IAKK.8LH@sdf.lonestar.org> seanp@sdf.lonestar.org (Sean Peoples) writes:

>The only other problem would be the impedance...On the SB and SB Pro, the 
>input impedance on the mic connector is 4 ohms, normal RCA outputs are 8,
>and headphones are anywhere from 2-8 ohms...You MUST match impedances 

MIC input impedance of 4 ohms. Seems a bit low, though I don't have the
spec sheet for SB Pro. MICs are typically somewhere between 600 and
10,000 ohms.

Robert

//////////////////////////////////////////////////////////////////////////
Robert Fries
Ungermann-Bass Inc.

DISCLAIMER:
    Opinions contained herein are my own, and are not necessarily those
    of Ungermann-Bass.
//////////////////////////////////////////////////////////////////////////

Technical Details

Message-ID: <rfries.165@sceng.ub.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!UB.com!pippen.ub.com!rfries

References: <1993Jan4.221827.16732@nosc.mil> <C0IAKK.8LH@sdf.lonestar.org>

Show Full Headers

Complete Article Headers

Newsgroups: comp.multimedia
Path: arc1-ca.pugleaf.net!sparky!uunet!UB.com!pippen.ub.com!rfries
From: rfries@sceng.ub.com (Robert Fries)
Subject: Re: Sound Blaster Pro "?"
Message-ID: <rfries.165@sceng.ub.com>
Sender: news@pippen.ub.com (The Daily News)
Nntp-Posting-Host: 128.203.1.151
Organization: Ungermann Bass
References: <1993Jan4.221827.16732@nosc.mil> <C0IAKK.8LH@sdf.lonestar.org>
Date: Sat, 9 Jan 1993 00:47:17 GMT
Lines: 20

Reply to Parent Message