Thread View: comp.multimedia
4 messages
4 total messages
Started by Adam Justin Thornton
Fri, 31 May 1991 14:14
Genlock or something.
Author: Adam Justin Thornton
Date: Fri, 31 May 1991 14:14
Date: Fri, 31 May 1991 14:14
15 lines
1107 bytes
1107 bytes
What's the best--that is, cheapest-- way to turn Mac II video output into
an NTSC signal; alternatively, is a simple video grabber, to take NTSC
output and put it into a window, that much more expensive?
Does anybody have product recommendations/warnings about something to do
either of these? I'm looking for the cheapest reasonable-quality solution
to overlay Mac and VDP output.
Thanks,
Adam
--
Adam Thornton | Opinions are mine alone, though Rice is welcome to them.
adam@owlnet.rice.edu | adam@is.rice.edu | adam@vm1.rice.edu | :-) :-) :-)
-->Welcome to Alpha Complex! The Computer is your Friend<--
64,928
Re: Genlock or something.
Author: Robert I. Eachus
Date: Fri, 31 May 1991 21:17
Date: Fri, 31 May 1991 21:17
32 lines
1985 bytes
1985 bytes
In article <1991May31.141424.5268@rice.edu> adam@boreal.rice.edu (Adam Justin Thornton) writes:
What's the best--that is, cheapest-- way to turn Mac II video output into
an NTSC signal.
If all you need is B/W, buy an Amiga, AMaxII, and a good GenLock.
For some purposes you won't need the genlock. (If you need color,
check on the latest release of AMaxII. The Amiga is color, and it
should be possible to do Mac color, but the Mac ROMs I used didn't
support color...) Since the Amiga output (even when running Mac
software) is already NTSC compatible, you are way ahead of the game,
and if you need to demo Mac software over a standard video system the
whole setup can cost less than $2000.
Also, if money is no object, but video quality is, you can buy an
Amiga 2000 with a Video Toaster from NewTek as a Mac peripheral (for
about $4000) which should give you a production quality image, but I
don't know how easy it is to pump the Mac images through the Toaster.
Flame avoidance: This is a serious post, and yes this does work
very well especially for classroom type settings. There are cases
where I would recommend Macs, but never in situations where you need a
quality NTSC signal.
--
Robert I. Eachus
with STANDARD_DISCLAIMER;
use STANDARD_DISCLAIMER;
function MESSAGE (TEXT: in CLEVER_IDEAS) return BETTER_IDEAS is...
Re: Genlock or something.
Author: Terry Jones
Date: Mon, 03 Jun 1991 13:56
Date: Mon, 03 Jun 1991 13:56
16 lines
1052 bytes
1052 bytes
> > What's the best--that is, cheapest-- way to turn Mac II video output into > an NTSC signal. > > If all you need is B/W, buy an Amiga, AMaxII, and a good GenLock. To answer the original question :), there are a number of options for Mac II video to NTSC conversion. Some answers depend on the type of video adapter you have in it. SOme of the Mac II boards will produce black or white (bi-level) NTSC video just with a special cable. Others will give you grey scale with a special cable. 8*24 and 8*24 GC and RAsterOps boards can have an optional RasterOps $499 video expander attached to give you recordable video directly. Best and cheapest are rarely the same creatures! tj
Re: Genlock or something.
Author: Siri Hewa
Date: Mon, 03 Jun 1991 22:55
Date: Mon, 03 Jun 1991 22:55
14 lines
1051 bytes
1051 bytes
In article <1991Jun3.135619.21026@gpu.utcs.utoronto.ca> tj@gpu.utcs.utoronto.ca (Terry Jones) writes: >> >> What's the best--that is, cheapest-- way to turn Mac II video output into >> an NTSC signal. >> I think Apple guys thinking of releasing, similar thing as you request. It not only gives composite video, but can genlock as well. I know they were testing these hardware, but release dates are supposed to be a secret... Thats all I can say at the moment. Siri Hewa. |||| OTC || Network R&D
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads