Anyone get ISA Action Media II doing image capture under win 3.1??

Thread View: comp.multimedia

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by michael.l.robins Sat, 09 Jan 1993 03:03

#1630

Author: michael.l.robins
Date: Sat, 09 Jan 1993 03:03

16 lines
1106 bytes

I have been unsuccessful in getting image capture working using an IBM
Action Media II board in an ISA machine. (Gateway DX266V with ATI local
bus video.) The confidence test and execiser program work fine, but I
can not get video capture to work under windows. I have loaded video for
windows and hardware DVI support is enabled, but when I run vidcapture 
a get a freeze frame of video and then the screen turns a strange shade
of yellow and I have to reboot windows.

If anyone has any ideas, or can assist in getting this working I sure
would appreciate the help.


				Mike Robins
				AT&T Bell Labs
				mlr2@hogpa.att.com
				(908) 949-2452

Re: Anyone get ISA Action Media II doing image capture under win 3.1??

#1642

Author: Elizabeth A. Weise
Date: Mon, 11 Jan 1993 13:39

34 lines
1794 bytes

In article <1993Jan9.030349.24572@cbnewsh.cb.att.com> mlr@cbnewsh.cb.att.com (michael.l.robins) writes:
>I have been unsuccessful in getting image capture working using an IBM
>Action Media II board in an ISA machine. (Gateway DX266V with ATI local
>bus video.) The confidence test and execiser program work fine, but I
>can not get video capture to work under windows. I have loaded video for
>windows and hardware DVI support is enabled, but when I run vidcapture 
>a get a freeze frame of video and then the screen turns a strange shade
>of yellow and I have to reboot windows.
>

I spoke with Intel about this problem (I was having problems with the
Confidence Test).  Anyway, they said there are some special things you
need to do with the AVK.ini file and some other magic.  Unfortunately,
I don't have those changes yet as I'm still waiting for a compatible
video card.  

My suggestion is to call the Intel Tech Support number printed in your
documentation.  The rep. I spoke with was quite helpful.

Good Luck.

>

-- 
****************************************************************************
Beth Weise / PhD Student / Dept. of Language, Literature, & Communication
Rensselaer Polytechnic Institute / Troy, New York
Weisee@rpi.edu / Beth_Weise@mts.rpi.edu

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads